| 欧洲标准_建筑材料和建筑物(六) [2007-9-26] |
EN 14317-1:2004 大楼绝热制品 现场制作的膨胀蛭石制品 第1部分：安装前粘合和松填制品的规范 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation
EN 14317-2:2007 建筑物热绝缘产品 现场制鳞状蛭石热绝缘产品 第2部分： 安装产品规范 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products
EN 14336:2004 大楼采暖设备 热水采暖设备的安装和交付使用 Heating systems in buildings - Installation and commissioning of water based heating systems
EN 14337:2005 建筑物的暖风系统 直接电热系统的设计和安装 Heating Systems in buildings - Design and installation of direct electrical room heating systems
EN 14351-1:2006 门窗.产品标准、性能特征.第1部分:无防漏火和/或烟特征的窗和外人行门具 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
EN 14358:2006 结构用木材 5%特征值的计算 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample
EN 14366:2004 污水排放装置噪声的实验室测量 Laboratory measurement of noise from waste water installations
EN 14367:2005 建筑物供水阀门.无控制不同压力区CA开关.一般技术规范 Non controllable backflow preventer with different pressure zones - Family C, type A
EN 14374:2004 木结构 结构层压胶合板 Timber structures - Structural laminated veneer lumber - Requirements
EN 14383-1:2006 Prevention of crime - Urban planning and building design - Part 1: Definition of specific terms
EN 14394:2005 加热锅炉 带强制鼓风燃烧器的加热锅炉 公称热量输出≤ 10 MW与最大工作温度110℃ Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 14406:2004 混凝土结构保护与维护制品与系统 试验方法 膨胀比和膨胀演化的测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution
EN 14411:2006 陶瓷砖.定义、分类、特性和标记 Ceramic tiles - Definitions, classification, characteristics and marking
EN 14428:2004 淋浴房 功能要求和试验方法 Shower enclosures - Functional requirements and test methods
EN 1443:2003 烟囱 通用要求 Chimneys - General requirements
EN 14437:2004 屋面砖瓦防掀性能的测定 屋面系统的试验方法 Determination of the uplift resistance of installed clay or concrete tiles for roofing - Roof system test method
EN 14471:2005 烟囱 配有塑料内衬的系统烟囱 Chimneys - System chimneys with plastic flue liners - Requirements and test methods
EN 14474:2004 预制混凝土制品 木屑混凝土 要求和试验方法 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods
EN 14487-1:2005 喷射混凝土 第1部分：定义、规格和合格性 Sprayed concrete - Part 1: Definitions, specifications and conformity
EN 14487-2:2006 Sprayed concrete - Part 2: Execution
EN 14488-1:2005 喷射混凝土试验 第1部分：初凝和固化混凝土试验 Testing sprayed concrete - Sampling fresh and hardened concrete
EN 14488-2:2006 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete
EN 14488-3:2006 检测喷射混凝土.纤维钢筋梁的挠曲强度（第一峰、最后和残余） Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
EN 14488-4:2005 喷射混凝土试验 第4部分：直接拉伸时钻芯的粘附强度 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
EN 14488-5:2006 喷射混凝土试验.第5部分:纤维钢筋混凝土板样本的能量吸收能力的测定 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
EN 14488-6:2006 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate
EN 14488-7:2006 检测喷射混凝土.第7部分:纤维钢筋混凝土的纤维含量 Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete
EN 14496:2005 绝热和隔音用石膏基胶粘剂和石膏板 定义、要求和试验方法 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods
EN 14497:2004 混凝土结构防护与维护用制品和系统 试验方法 渗滤稳定性的测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability
EN 14498:2004 混凝土结构防护与维护用制品和系统 试验方法 空气中干燥和放入水中循环后体积和重量的变化 Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles
EN 14501:2005 挡板和百叶窗 温度和视觉舒适性 性能要求和分类 Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification
EN 14509:2006 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
EN 1451-1:1998 建筑结构内粪便和排污(低和高温)用塑料管系统.聚丙烯(PP)管.第1部分:管、管配件和系统的要求 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
EN 14516:2006 家用浴缸 Baths for domestic purposes
EN 14518:2005 大楼通风 冷管 被动式冷管的试验和评定 Ventilation for buildings - Chilled beams - Testing and rating of passive chilled beams
EN 1452-5:1999 供水用塑料管道.非增塑聚氯乙烯(PVC-U).第5部分:系统目的用适用性 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
EN 14527:2006 家用喷射式塔盘 Shower trays for domestic purposes
EN 14528:2007 坐浴盆 功能要求和试验方法 Bidets - Functional requirements and test methods
EN 1453-1:2000 建筑物内污水和废弃物排放(低和高温)带有结构壁管的塑料管系统.非增塑聚氯乙烯(PVC-U).第1部分:管子和管道系统的要求 Plastics piping systems with structured wall-pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
EN 1455-1:1999 建筑物内污物和污水排放(低、高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管件、配件和系统要求 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system
EN 1457:1999 烟囱.粘土/陶瓷烟气线.要求和试验方法(EN 1457) Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods
EN 1457:1999/A1:2002 EN 1457:1999的第一次补充件 Chimneys - Clay/ceramic flue liners - Requirements and test methods
EN 14575:2005 土工合成密封卷材 测定耐氧化性能的筛分试验方法 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
EN 14579:2004 天然石料试验方法.声速传播的测定 Natural stone test methods - Determination of sound speed propagation
EN 14580:2005 天然石试验方法 静态弹性模量的测定 Natural stone test methods - Determination of static elastic modulus
EN 14581:2004 天然石试验材料 线性热膨胀系数的测定 Natural stone test methods - Determination of linear thermal expansion coefficient
EN 14600:2005 有耐火和/或控制烟雾特性的门户装置和可开启窗.要求和分类.德文版本EN 14600-2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
EN 14608:2004 窗 抗挤压性能的测定 Windows - Determination of the resistance to racking
EN 14609:2004 窗 耐静态扭转阻力的测定 Windows - Determination of the resistance to static torsion
EN 14617-1:2005 岗石 试验方法 第1部分：表观密度和吸水率的测定 Agglomerated stone - Test methods - Part 1: Determination of apparent density and water absorption
EN 14617-10:2005 岗石 试验方法 第10部分：耐化学性能的测定 Agglomerated stone - Test methods - Part 10: Determination of chemical resistance
EN 14617-11:2005 烧结石料.试验方法.第11部分:线性热膨胀系数测定 Agglomerated stone - Test methods - Part 11: Determination of linear thermal expansion coefficient
EN 14617-12:2005 烧结石料.试验方法.第12部分:尺寸稳定性测定 Agglomerated stone - Test methods - Part 12: Determination of dimensional stability
EN 14617-13:2005 岗石 试验方法 第13部分：电阻率的测定 Agglomerated stone - Test methods - Part 13: Determination of electrical resistivity
EN 14617-15:2005 岗石 试验方法 第15部分：抗压性能测定 Agglomerated stone - Test methods - Part 15: Determination of compressive strength
EN 14617-16:2005 岗石 试验方法 第16部分：片块尺寸、几何特征和表面质量的测定 Agglomerated stone - Test methods - Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles
EN 14617-2:2004 岗石 试验方法 第2部分：抗弯性能的测定 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
EN 14617-4:2005 岗石 试验方法 第4部分：耐磨性能的测定 Agglomerated stone - Test methods - Part 4: Determination of the abrasion resistance
EN 14617-5:2005 岗石 试验方法 第5部分：抗冻抗解冻交变性能的测定 Agglomerated stone - Test methods - Part 5: Determination of freeze and thaw resistance
EN 14617-6:2005 岗石 试验方法 第6部分：抗温度交变性能的测定 Agglomerated stone - Test methods - Part 6: Determination of thermal shock resistance
EN 14617-9:2005 岗石 试验方法 第9部分：抗冲击性能的测定 Agglomerated stone - Test methods - Part 9: Determination of impact resistance
EN 14618:2005 岗石 术语和分类 Agglomerated stone - Terminology and classification
EN 1462:2004 屋檐水沟用托架 要求和试验 Brackets for eaves gutters - Requirements and testing
EN 14622:2005 饮用水防回流污染的安全装置 具有环流的气隙(受限） A类F型 Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F
EN 14623:2005 饮用水防回流污染的安全装置 具有最小直径环流的气隙(由试验或测量验证） A类G型 Devices to prevent pollution by backflow of potable water - Air gaps with minimum circular overflow (verified by test or measurement) - Family A, type G
EN 14629:2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete
EN 14630:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method
EN 14647:2005 铝酸钙水泥 成分、要求和合格标准 Calcium aluminate cement - Composition, specifications and conformity criteria
EN 14649:2005 预制混凝土制品 混凝土玻璃纤维强度的试验方法(SIC试验) Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST)
EN 14650:2005 混凝土预制件 工厂对金属纤维混凝土产品检查的一般规则 Precast concrete products - General rules for factory production control of metallic fibered concrete
EN 14651:2005 金属纤维混凝土试验方法 挠曲拉伸强度的测量(比例范围，残余挠曲拉伸强度) Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual)
EN 14652:2005+A1:2007 大楼内饮用水处理设备 膜式过滤器 功能、安全和试验的要求(包含2007年的第一次补充件) Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing
EN 1467:2003 天然石坯材 要求 Natural stone - Rough blocks - Requirements
EN 1468:2003 天然石 半成品 要求 Natural stone - Rough slabs - Requirements
EN 14688:2006 Sanitary appliances - Wash basins - Functional requirements and test methods
EN 1469:2004 天然石制品 贴面板 要求 Natural stone products - Slabs for cladding - Requirements
EN 14691:2005 防水卷材 混凝土桥面和其它混凝土路面的防水 热停放后相容性的测定 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Compatibility by heat conditioning
EN 14692:2005 防水卷材 混凝土桥面和其它混凝土路面的防水 沥青层耐冲击性能的测定 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer
EN 14693:2006 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the behaviour of bitumen sheets during application of mastic asphalt
EN 14694:2005 防水卷材 混凝土桥面和其它混凝土路面的防水 预处理损坏后耐动态水压的测定 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment
EN 14706:2005 建筑设备和工业装置用绝热制品 应用上限温度的测定 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
EN 14707:2005 建筑设备和工业安装用绝热制品 预制管道绝热材料使用上限温度的测定 Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation
EN 1471:1996 织物地毯 外观变化的评定 Textile floor coverings - Assessment of changes in appearance
EN 14716:2004 预拉吊顶 要求和试验方法 Stretched ceilings - Requirements and test methods
EN 14721:2005 金属纤维混凝土试验方法 新配制和凝固混凝土纤维含量的测定 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
EN 14733:2005 沥青和沥青粘合剂 沥青乳胶、溶解沥青和低熔点沥青的工厂生产检验 Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control
EN 14743:2005+A1:2007 大楼内饮用水处理设备 硬水软化器 施工、要求和试验(包含2007年的第一次补充件) Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing
EN 14759:2005 卷帘 隔音 性能表示 Shutters - Acoustic insulation relative to airborne sound - Expression of performance
EN 14769:2005 沥青和沥青粘合剂 压力老化容器(PAV)的加速长效老化 Bitumen and bituminous binders - Accelerated long-term ageing conditioning by a Pressure Ageing Vessel (PAV)
EN 14770:2005 沥青和沥青粘接剂 复合剪切模量和相位角的测定 动态流变计(DSR) Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)
EN 14771:2005 沥青和含沥青粘合剂 弯曲蠕变刚性的测定 弯曲梁流变仪 Bitumen and bituminous binders - Determination of the flexural creep stiffness - Bending Beam Rheometer (BBR)
EN 14782:2006 屋面用外包和内衬自支护金属薄板 产品规格和要求 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 14783:2006 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements
EN 14812:2005+A1:2007 建筑物内饮用水的处理设备 化学配量系统 预定配量系统 性能要求、安全和试验(包含2007年的第一次补充件) Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
EN 14843:2007 Precast concrete products - Stairs
EN 14844:2006 Precast concrete products - Box culverts
EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes
EN 14845-2:2006 Test methods for fibres in concrete - Part 2: Effect on concrete
EN 1487:2000 热水水箱的水力安全装置组。 Building valves - Hydraulic safety groups - Tests and requirements
EN 1488:2000 建筑物用阀门.膨胀阀组.试验和要求 Building valves - Expansion groups - Tests and requirements
EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity
EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity
EN 1489:2000 建筑物用阀门.压力安全阀.试验和要求 Building valves - Pressure safety valves - Tests and requirements
EN 14895:2006 沥青和沥青粘接剂 沥青乳化或油溶沥青或助溶沥青粘合剂的稳定 Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders
EN 14896:2006 Bitumen and bituminous binders - Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders - Rotating spindle viscometer method
EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
EN 14898:2006+A1:2007 建筑物内水处理设备.活性媒介过滤器.性能、安全和试验要求(包含2007年的第一次补充件) Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing
EN 1490:2000 建筑物用阀门.温度和压力组合安全阀.试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 14909:2006 防水卷材 防水蒸汽塑胶卷材 定义和性能 Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics
EN 1491:2000 建筑物阀门.膨胀阀门.试验和要求 Building valves - Expansion valves - Tests and requirements
EN 14963:2006 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN 14964:2006 Rigid underlays for discontinuous roofing - Definitions and characteristics
EN 14967:2006 防水用柔性薄板.沥青防潮层.定义和特征 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics
EN 14989-1:2007 Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1: Vertical air/flue terminals for C6-type appliances
EN 14991:2007 Precast concrete products - Foundation elements
EN 14992:2007 Precast concrete products - Wall elements
EN 15026:2007 Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation
EN 15036-1:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
EN 15036-2:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2: Flue gas noise emissions at the outlet of the heat generator
EN 1504-1:2005 混凝土结构的保护和维修用制品和系统 定义、要求、质量、评定 第1部分：定义 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
EN 1504-10:2003 混凝土结构养护和用品和系统 定义、要求、质量控制和合格评定 第10部分：建筑工地材料和系统的应用、施工质量控制 Products and systems for the protection and repair of concrete structures - Definitions - Requirements - Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
EN 1504-2:2004 混凝土结构的保护和维修用制品和系统 定义、要求、质量和合格评定 第4部分：混凝土的表面防护体系 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 1504-3:2005 混凝土结构的养护用产品和系统 定义、要求、质量控制和合格评定 第3部分：结构性和非结构性修理 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
EN 1504-4:2004 混凝土结构养护和用品和系统 定义、要求、质量控制和合格评定 第4部分：建筑用胶粘剂 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding
EN 1504-5:2004 混凝土结构养护和维修制品和系统 定义、要求、质量、评定 第5部分：混凝土浇注 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 1504-8:2004 混凝土结构的保护和维修用产品和系统.定义、要求、质量控制和合格评价.第8部分:质量控制和合格评价 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 8: Quality control and evaluation of conformity
EN 1505:1997 建筑通风.矩形剖面的片状空气气管 Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions
EN 15050:2007 Precast concrete products - Bridge elements
EN 15057:2006 Fibre cement profiled sheets - Impact resistance test method
EN 1506:2007 建筑通风.圆形剖面的片状金属空气气管.尺寸 Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions
EN 1507:2006 建筑通风 矩形截面金属板空气管道 强度和密封度要求 Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage
EN 15091:2006 Sanitary tapware - Electronic opening and closing sanitary tapware
EN 1516:1999 运动场地表面.抗压凹的测定 Surfaces for sports areas - Determination of resistance to indentation
EN 15161:2006 Water conditioning equipment inside buildings - Installation, operation, maintenance and repair
EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
EN 15183:2006 Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
EN 15184:2006 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
EN 1520:2002 带开放结构的轻集料混凝土预制件 Prefabricated reinforced components of lightweight aggregate concrete with open structure
EN 15200:2007 Sanitary appliances - Multifunction shower cabinets
EN 1521:1996 带有开口结构的轻型集料混凝土的弯曲强度的测定 Determination of flexural strength of lightweight aggregate concrete with open structure
EN 15217:2007 Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
EN 15218:2006 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling - Terms, definitions, test conditions, test methods and requirements
EN 15219:2006 Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing
EN 1522:1998 窗、门、遮板和遮帘.防弹.要求和分类 Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification
EN 15221-1:2006 设备管理.第1部分:术语和定义 Facility Management - Part 1: Terms and definitions
EN 15221-2:2006 Facility Management - Part 2: Guidance on how to prepare Facility Management agreements
EN 1523:1998 窗、门、遮板和遮帘.防弹.试验方法 Windows, doors, shutters and blinds - Bullet resistance - Test method
EN 15239:2007 Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems
EN 15240:2007 Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems
EN 15241:2007 Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings
EN 15242:2007 Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration
EN 15251:2007 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics
EN 1527:1998 建筑五金.滑道门和折叠门用建筑五金.要求和试验方法 Building hardware - Hardware for sliding doors and folding doors - Requirements and test methods
EN 1529:1999 门.高、宽、厚和面积.公差等级 Doors leaves - Height, width, thickness and squareness - Tolerance classes
EN 1530:1999 门.总则和平整度.公差等级 Door leaves - General and local flatness - Tolerance classes
EN 15304:2007 Determination of the freeze-thaw resistance of autoclaved aerated concrete
EN 15319:2007 General principles of design of fibrous (gypsum) plaster works
EN 15323:2007 Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
EN 15326:2007 Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method
EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
EN 15361:2007 Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete
EN 154:1991 瓷砖和瓷板.耐磨强度的测定--釉面砖和板 Ceramic tiles - Determination of resistance to surface abrasion - Glazed tiles
EN 15417:2006 起重机.下滑车.带滑动轴承的D型绳索轮 Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input greater than 70 kW but not exceeding 1000 kW
EN 1542:1999 混凝土结构的修复和保护用产品和系统.试验方法.脱落法测量粘结强度 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
EN 1543:1998 混凝土结构保护和修复产品及系统 试验方法 聚酯拉伸强度发展的测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of tensile strength development for polymers
EN 1544:2006 混凝土结构的保护和修理用产品和系统 试验方法 合成树脂产品 当拉伸力为+23和+50时蠕变强度的测量 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars
EN 1555-1:2002 气体燃料输送用塑料管道系统 聚乙烯(PE) 第1部分:总则 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
EN 1555-2:2002 输送燃气用塑料管道系统 聚乙烯(PE) 第2部分:管 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
EN 1555-3:2002 燃气输送用塑料管道系统 聚乙烯(PE) 第3部分:管配件 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
EN 1555-3:2002/A1:2005 EN 1555-3:2002的第一次补充件 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
EN 1555-4:2002 燃气输送用塑料管系统 聚乙烯(PE) 第4部分:阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
EN 1555-5:2002 燃气输送用塑料管系统 聚乙烯(PE) 第5部分:系统适用性 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 1565-1:1998 建筑物内污物和污水排放(低、高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).第1部分:管件、配件和系统规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system
EN 1567:1999 建筑物阀门.供水减压阀和复合供水减压阀.要求和试验 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
EN 159:1991 吸水率E ≤10%的粉压陶瓷瓷砖 BIII组 Dust-pressed ceramic tiles with water absorption E>10% - Group BIII
EN 1602:1996 用于建筑设施的绝热产品--表观密度的测定 Thermal insulating products for building applications - Determination of the apparent density
EN 1603:1996 用于建筑设施的绝热产品--在恒定的标准实验室条件下(温度为23℃,相对湿度为50%)测定尺寸的稳定性 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)
EN 1603:1996/A1:2006 EN 1603:1996的第一次补充件 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23°C/50 % relative humidity)
EN 1604:1996 用于建筑设施的绝热产品--在规定温度和湿度条件下测定尺寸的稳定性 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1604:1996/A1:2006 EN 1604:1996的第一次补充件 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1605:1996 用于建筑设施的绝热产品--在规定加压负载和温度条件下的畸变测定 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 1605:1996/A1:2006 EN 1605:1996的第一次补充件 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 1606:1996 用于建筑设施的绝热产品--加压蠕变的测定 Thermal insulating products for building applications - Determination of compressive creep
EN 1606:1996/A1:2006 EN 1606:1996的第一次补充件 Thermal insulating products for building applications - Determination of compressive creep
EN 1607:1996 用于建筑设施的绝热产品--垂直于表面的抗拉强度的测定 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 1608:1996 用于建筑设施的绝热产品--平行于表面的抗拉强度的测定 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
EN 1609:1996 用于建筑设施的绝热产品--通过部分浸水测定短期的吸水性 Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
EN 1609:1996/A1:2006 EN 1609:1996的第一次补充件 Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion
EN 1634-3:2004 门和遮板的防火试验 第3部分:烟控门和遮板 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 3: Smoke control test for door and shutter assemblies
EN 1670:2007 建筑五金.防腐蚀.要求和试验方法 Building hardware - Corrosion resistance - Requirements and test methods
EN 1717:2000 饮用水设施污染防治和防止回流污染装置的一般要求 Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
EN 1737:1998 敞形结构高压蒸养加气混凝土或轻集料混凝土预制件用钢筋网或罩的焊缝剪切强度测定 Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1738:1998 高压蒸养加气混凝土制无负荷钢筋元件钢应力的测定 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete
EN 1739:2007 敞形结构高压蒸养加气混凝土或轻集料混凝土预制件间接缝的共面力剪切强度测定 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1740:1998 主要为纵向负载下的敞形结构高压蒸养加气混凝土或轻集料混凝土预制加筋元件的性能试验(立式元件) Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
EN 1741:1998 敞形结构高压蒸养加气混凝土或轻集料混凝土预制件间接缝的面外力剪切强度测定 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1742:1998 敞形结构高压蒸养加气混凝土或轻集料混凝土制多层元件不同层间剪切强度的测定 Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 1744-3:2002 集料化学性能的试验 第3部分:通过沥漏作洗提准备 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
EN 1744-4:2005 集料的化学性能试验 第3部分：对沥青混合料中填料水敏性的测定 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
EN 1744-5:2006 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
EN 1745:2002 砖石工程.测定设计热值方法 Masonry and masonry products - Methods for determining design thermal values
EN 1751:1998 建筑物通风.空气终端装置.调节器和阀门的空气动力试验 Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves
EN 176:1991 具低吸水率的粉末挤压陶瓷瓷砖（E ≤3%） BI组 Dust-pressed ceramic tiles with a low water absorption (E<=3%) - Group BI
EN 1766:2000 混凝土结构的保护和维修用产品和系统.试验方法.试验用参考混凝土 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
EN 1767:1999 混凝土结构防护和修理用产品和系统,试验方法.红外分析(EN 1767) Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
EN 177:1991 具吸水率3% Dust-pressed ceramic tiles with a water absorption of 3%
EN 1770:1998 混凝土结构保护和修复产品及系统 试验方法 热膨胀系数的测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion
EN 1771:2004 混凝土结构保护和维修用的产品和系统 试验方法 通过注入砂柱对喷灌能力的测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of injectability and splitting test
EN 1775:1998 燃气供应.建筑物燃气管道工程.最大工作压力小于或等于5Bar的.功能推荐 Gas supply - Gas pipework for buildings - Maximum operating pressure <= 5 bar - Functional recommendations
EN 1775:1998/A1:2000 EN 1775:1998的第1次补充件 Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations
EN 1775:1998/A2:2000 EN 1775:1998的第2次补充件 Gas supply - Gas pipework for buildings - Maximum operating pressure <= 5 bar - Functional recommendations
EN 178:1991 具吸水率6% Dust-pressed ceramic tiles with a water absorption of 6%
EN 179:1997 建筑五金.通过操作杆或按钮控制的紧急出口装置.要求和试验方法 Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
EN 179:1997/A1:2001 EN 179:1997的第一次补充件 Building hardware - Emergency exit devices operated by a lever handle or push pad - Requirements and test methods
EN 1799:1998 混凝土结构的保护和修理的产品和系统.试验方法.混凝土表面应用的结构性粘结剂适用性的测量试验 Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface
EN 1806:2006 烟囱.单壁烟囱用粘土/陶瓷燃料块.要求和试验方法 Chimneys - Clay/ceramic flue blocks for single wall chimneys - Requirements and test methods
EN 1837:1999 安全性和机械.机器的组合照明设备 (欧洲标准EN 1837) Safety of machinery - Integral lighting of machines
EN 1838:1999 照明设施.应急照明 Lighting applications - Emergency lighting
EN 1844:2001 防水挠性薄板.耐臭氧性测定.屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
EN 1847:2001 防水挠性薄板.屋顶防水用塑料和橡胶薄板.暴露于包括水的液态化合物的方法 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water
EN 1848-1:1999 防水挠性薄板.长度宽度和垂直度测定.第1部分:屋顶防水用沥青毡片 Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing
EN 1848-2:2001 防水挠性薄板.长度、宽度和平直度的测定.第2部分:屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing
EN 1849-1:1999 防水挠性薄板.厚度和每单位面积质量的测定.第1部分:屋顶防水用沥青毡片 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
EN 1849-2:2001 防水挠性薄板.厚度和单位面积质量的测定.第2部分:屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing
EN 1850-1:1999 防水挠性薄板.目视缺陷确定.第1部分:屋顶防水用沥青毡片 Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing
EN 1850-2:2001 防水挠性薄板.外观缺陷测定.第2部分:屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing
EN 1856-1:2003 烟囱 金属烟囱要求 第1部分:系统烟囱制品 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-1:2003/A1:2006 EN 1856-1:2003的第一次补充件 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
EN 1856-2:2004 烟囱 金属烟囱的要求 第2部分：金属衬管和烟道接管 Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes
EN 1857:2003 烟囱 部件 水泥烟道内衬 Chimneys - Components - Concrete flue liners
EN 1858:2003 烟囱 部件 混凝土烟道预制块 Chimneys - Components - Concrete flue blocks
EN 1859:2000 烟囱.金属烟囱.试验方法 Chimneys - Metal chimneys - Test methods
EN 1859:2000/A1:2006 EN 1859:2000的第一次补充件 Chimneys - Metal chimneys - Test methods
EN 186-1:1991 陶瓷瓷砖 具吸水率3% Ceramic tiles - Extruded ceramic tiles with a water absorption of 3%
EN 186-2:1991 陶瓷瓷砖 具吸水率3% Ceramic tiles - Extruded ceramic tiles with a water absorption of 3%
EN 187-1:1991 陶瓷瓷砖 具吸水率6% Ceramic tiles - Extruded ceramic tiles with a water absorption of 6%
EN 187-2:1991 陶瓷瓷砖 具吸水率6% Ceramic tiles - Extruded ceramic tiles with a water absorption of 6%
EN 1873:2005 屋顶预制附件 分立式塑料顶灯拱 Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods
EN 1877-1:2000 混凝土结构的防护和维修用的产品和系统.试验方法.环氧树脂的活性功能.第1部分:环氧树脂等效性测定 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent
EN 1877-2:2000 混凝土结构防护和维修用的产品和系统.试验方法;环氧树脂的活性功能.第2部分:使用总的基本数测定胺功能 Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number
EN 188:1991 陶瓷瓷砖 具吸水率E<10%的挤压陶瓷瓷砖（AIII组） Ceramic tiles - Extruded ceramic tiles with a water absorption of E>10% (Group AIII)
EN 1881:2006 混凝土构件保护和修理用产品和系统 试验方法 第1部分：抗拨力试验 未裂缝混凝土 Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method
EN 1886:1998 建筑通风.空气处理装置.机械性能 Ventilation for buildings - Air handling units - Mechanical performance
EN 1906:2002 锁把手机械试验 Building hardware - Lever handles and knob furniture - Requirements and test methods
EN 1925:1999 天然石材的试验方法.用毛细管现象测定吸水系数 Natural stone test methods - Determination of water absorption coefficient by capillarity
EN 1926:2006 天然石材的试验方法.抗压强度测定 Natural stone test methods - Determination of uniaxial compressive strength
EN 1928:2000 防水挠性薄板.屋面防水用沥青、塑料和橡胶薄板.水密性测定 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness
EN 1931:2000 防水挠性薄板.屋面防水用沥青、塑料和橡胶薄板.水蒸汽渗透性测定 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties
EN 1932:2001 外遮帘和百叶窗.抗风能力.试验方法 External blinds and shutters - Resistance to wind loads - Method of testing
EN 1933:1998 外防护板.耐水积聚负载能力.试验方法(欧洲标准EN 1933) Exterior blinds - Resistance to load due to water accumulation - Test method
EN 1934:1998 建筑物热性能.使用热流计用热盒法对热抗性的测定.砖石结构.(欧洲标准EN 1934) Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry
EN 1935:2002 建筑五金.单轴链接件的要求和试验方法. Building hardware - Single-axis hinges - Requirements and test methods
EN 1936:2006 天然石材的试验方法.实密度、表观密度、总孔隙率和开放孔隙率的测定 Natural stone test methods - Determination of real density and apparent density, and of total and open porosity
EN 1937:1999 水硬地面平整和/或找平填料的试验方法.标准混合法 Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures
EN 1946-1:1999 建筑产品及部件的热性能.评估实验室测量热传递性能的专用准则.第1部分:通则 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria
EN 1946-2:1999 建筑产品及部件的热性能.评估实验室测量热传递性能的专用准则.第2部分:保温板测量法 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method
EN 1946-3:1999 建筑产品及部件的热性能.评估实验室测量热传递性能的专用准则.第3部分:热流量计测量法 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method
EN 1946-4:2000 建筑物产品和部件的热性能.评价实验室测量热传输性能的专用准则.第4部分:热盒法测量 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods
EN 1946-5:2000 建筑物产品和部件的热性能.评价实验室测量热传输性能的专用准则.第5部分:管道实验方法测量 Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods
EN 196-1:2005 水泥检验方法 第1部分：强度测定 Methods of testing cement - Part 1: Determination of strength
EN 196-10:2006 Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement
EN 196-2:2005 水泥检验方法 第2部分：水泥的化学分析 Methods of testing cement - Part 2: Chemical analysis of cement
EN 196-3:2005 水泥检验方法 第3部分：凝固时间和稳定性的测定 Methods of testing cement - Part 3: Determination of setting times and soundness
EN 196-5:2005 水泥检验方法 第5部分：炉渣水泥的凝硬性的测定 Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement
EN 196-6:1989 水泥的检验方法;细度测定 Methods of testing cement - Determination of fineness
EN 196-7:1989 水泥的检验方法;水泥的取样和选样方法 Methods of testing cement - Methods of taking and preparing samples of cement
EN 196-8:2003 水泥的试验方法 第8部分：水合热 溶剂法 Methods of testing cement - Part 8: Heat of hydration - Solution method
EN 196-9:2003 水泥试验方法 第9部分：水合热 半绝热法 Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method
EN 197-1:2000 水泥.第1部分:普通水泥的组份、规范和符合性准则 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 197-1:2000/A1:2004 EN 197-1:2000的第1次补充件 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 197-1:2000/A3:2007 EN 197-1:2000的第3次补充件 Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 197-2:2000 水泥.第2部分:合格评定 Cement - Part 2: Conformity evaluation
EN 197-4:2004 水泥 第4部分：低早强高炉水泥的成分、规格和合格标准 Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements
EN 198:1987 丙烯酸材料制造家用浴盆规格 Specification for finished baths for domestic purposes made of acrylic material
|
|
|
|
