| CEN欧洲标准_建筑物和建筑材料(五) [2007-9-26] |
EN 1990:2002 欧洲建筑规范 结构设计基础 Eurocode - Basis of structural design
EN 1990:2002/A1:2005 EN 1990:2002的第一次补充件 Eurocode - Basis of structural design
EN 1991-1-1:2002 欧洲码1：对结构的作用 第1-1部分：对一般作用 密度、自重、对建筑物的施加负荷 Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
EN 1991-1-2:2002 欧洲代码1：对承重件影响 第1-2部分:一般影响 火对承重件的影响 Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
EN 1991-1-3:2003 欧洲建筑法规1：对结构的作用 第1-3部分：一般作用、雪载 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads
EN 1991-1-4:2005 欧洲建筑规范1：对结构的影响 第1-4部分：一般影响、风载 Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
EN 1991-1-5:2003 欧洲建筑法规1：对承重件影响 第1-5部分：一般影响 温度影响 Eurocode 1: Actions on structures - Part 1-5: General actions - Thermal actions
EN 1991-1-6:2005 欧洲建筑法规1：对承重件影响 第1-6部分：施工影响 Eurocode 1 - Actions on structures Part 1-6: General actions - Actions during execution
EN 1991-1-7:2006 Eurocode 1 - Actions on structures - Part 1-7: General actions - Accidental actions
EN 1991-2:2003 欧洲建筑法规1：对承重件的影响 第2部分：桥梁的交通负荷 Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges
EN 1991-3:2006 Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
EN 1991-4:2006 结构作用和设计基础.第4部分:竖井和水箱的作用 Eurocode 1 - Actions on structures - Part 4: Silos and tanks
EN 1992-1-1:2004 欧洲建筑施工规范2 钢筋混凝土结构设计 第1-1部分：总规范和建筑规范 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings
EN 1992-1-2:2004 欧洲法规2.混凝土结构设计.一般规则.结构防火设计 Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design
EN 1992-2:2005 Eurocode 2 - Design of concrete structures - Concrete bridges - Design and detailing rules
EN 1992-3:2006 Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures
EN 1993-1-1:2005 欧洲建筑规范3：钢结构设计 第1-1部分：一般规范和大楼规范 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
EN 1993-1-10:2005 欧洲建筑规范3：钢结构设计 第1-10部分：对钢种断裂韧性的选择和厚度方向的性能 Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
EN 1993-1-11:2006 Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
EN 1993-1-12:2007 Eurocode 3 - Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700
EN 1993-1-2:2005 欧洲法规3.钢结构的设计.一般规则.结构性消防设计 Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design
EN 1993-1-3:2006 欧洲法规3:钢结构设计.第1-3部分:一般规则.冷成形薄壁构件和板材的补充规则; 德文版本 ENV 1993-1-3:1996 Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting
EN 1993-1-4:2006 Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels
EN 1993-1-5:2006 Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
EN 1993-1-6:2007 欧洲法规3:钢结构设计.第1-7部分:一般规则.无平面负载的平面镀层结构元件的补充规则; 德文版本 ENV 1993-1- Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures
EN 1993-1-7:2007 Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading
EN 1993-1-8:2005 欧洲建筑规范3：钢结构设计 第1-8部分：连接设计 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
EN 1993-1-9:2005 欧洲建筑规范：钢结构设计 第1-9部分：疲劳 Eurocode 3: Design of steel structures - Part 1-9: Fatigue
EN 1993-2:2006 Eurocode 3 - Design of steel structures - Part 2: Steel Bridges
EN 1993-3-1:2006 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
EN 1993-3-2:2006 Eurocode 3 - Design of steel structures - Part 3-2: Towers, masts and chimneys - Chimneys
EN 1993-4-1:2007 Eurocode 3 - Design of steel structures - Part 4-1: Silos
EN 1993-4-2:2007 Eurocode 3 - Design of steel structures - Part 4-2: Tanks
EN 1993-4-3:2007 Eurocode 3 - Design of steel structures - Part 4-3: Pipelines
EN 1993-5:2007 Eurocode 3 - Design of steel structures - Part 5: Piling
EN 1993-6:2007 Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
EN 1994-1-1:2004 欧州建筑法规4：钢筋混凝土构件设计 第1-1部分：总则和建筑物规范 Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings
EN 1994-1-2:2005 Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design
EN 1994-2:2005 欧州建筑法规4：钢筋混凝土构件设计 第2部分：总则和桥梁规范 Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges
EN 1995-1-1:2004 欧洲建筑规范5 木结构设计 第1-1部分：总则 通则和木结构总则 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings
EN 1995-1-2:2004 欧洲法规5.木结构的设计.总则.结构防火设计 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design
EN 1995-2:2004 欧洲建筑规范5：木结构设计 第2部分：桥梁 Eurocode 5: Design of timber structures - Part 2: Bridges
EN 1996-1-1:2005 欧洲建筑规范6：砌体结构的设计 第1-1部分：增强和不增强砌体结构的一般规则 Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
EN 1996-1-2:2005 欧洲规范6.砖石工程结构设计.一般规则.结构防火设计 Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design
EN 1996-2:2006 欧洲建筑规范6：砌体结构设计 第2部分：设计考虑、材料选择和砌体施工 Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
EN 1996-3:2006 欧洲建筑规范6：砌块结构设计 第3部分：无配筋砌块结构的简化计算法 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures
EN 1997-1:2004 欧洲建筑规范7：土木工程设计 第1部分：总则 Eurocode 7: Geotechnical design - Part 1: General rules
EN 1997-2:2007 Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
EN 1998-1:2004 欧洲建筑规范8：抗地震结构设计 第1部分：总则、地震作用和建筑规范 Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings
EN 1998-2:2005 欧洲建筑规范8 结构抗震设计 第2部分：桥梁 Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges
EN 1998-3:2005 欧洲建筑规范8：抗震结构设计 第3部分：建筑的评定与翻新 Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings
EN 1998-4:2006 Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks and pipelines
EN 1998-5:2004 欧洲建筑规范8：抗震结构的设计 第5部分：有关地基结构和土方技术说明 Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects
EN 1998-6:2005 欧洲建筑规范8：抗震结构的设计 第6部分：塔、杆和烟囱 Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys
EN 1999-1-1:2007 Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
EN 1999-1-2:2007 Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
EN 1999-1-3:2007 Eurocode 9: Design of aluminium structures – Part 1-3: Structures susceptible to fatigue
EN 1999-1-4:2007 Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting
EN 1999-1-5:2007 Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures
EN 200:2004 卫生设备 放水阀和冷热水混合水嘴(PN10) 一般技术要求 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
EN 20140-10:1992 声学.建筑物和建筑物构件隔音性能测量.小型构件气载声隔离性能实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements (ISO 140-10:1991)
EN 20140-2:1993 建筑物的声学测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991)
EN 206-1:2000 混凝土 第1部分:规定、性能、制造和合格 Concrete - Part 1: Specification, performance, production and conformity
EN 206-1:2000/A1:2004 EN 206-1:2000的第1次补充件 Concrete - Part 1: Specification performance, production and conformity
EN 206-1:2000/A2:2005 EN 206-1:2000的第2次补充件 Concrete - Part 1: Specification performance, production and conformity
EN 215:2004 恒温散热气阀 要求和试验方法 Thermostatic radiator valves - Requirements and test methods
EN 215:2004/A1:2006 EN 215:2004的第一次补充件 Thermostatic radiator valves - Requirements and test methods
EN 232:2003 浴缸 连接尺寸 Baths - Connecting dimensions
EN 233:1999 卷筒墙面饰物.抛光墙纸、乙烯和塑料墙纸 Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings
EN 234:1989 卷筒形墙壁覆盖物.后成装饰用壁纸的规格 Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration
EN 234:1989/A1:1996 NF EN 235-1989的修改件1 Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration
EN 235:2001 墙面复盖物.术语和符号 Wallcoverings - Vocabulary and symbols
EN 246:2003 卫生阀门。喷嘴调节器。一般技术条件。 Sanitary tapware - General specifications for flow rate regulators
EN 248:2002 卫生龙头.镍铬电镀覆层的一般技术规范 Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
EN 251:2003 冲淋底盘 连接尺寸 Shower trays - Connecting dimensions
EN 259-1:2001 卷筒壁纸.高负载壁纸.第1部分:规范 Wallcoverings in roll form - Heavy duty wallcoverings - Part 1: Specifications
EN 259-2:2001 卷筒壁纸.高负载壁纸.第2部分:耐冲击测定 Wallcoverings in roll form - Heavy duty wallcoverings - Part 2: Determination of impact resistance
EN 26:1997 采用常压喷嘴的卫生器具用的燃气快速热水器 Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)
EN 26:1997/A1:2000 EN 26:1997的第一次补充件 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
EN 26:1997/A2:2004 EN 26:1998的第一次补充件 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
EN 26:1997/A3:2006 EN 26:1999的第一次补充件 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
EN 263:2002 家用浴缸和淋浴盆的交联铸塑的丙烯酸酯板 Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes
EN 266:1991 卷形护墙层.织物墙纸规格 Wall coverings in roll form - Specification for textile wall coverings
EN 26891:1991 木结构.用机械固定构件实现的组装.测定强度和变形性能的一般原则 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983)
EN 26927:1990 建房工程.接合产品.密封胶--词汇 Building construction - Jointing products - Sealants - Vocabulary (ISO 6927:1981)
EN 274-1:2002 卫生器具的下水管道配件.第1部分:要求 Waste fittings for sanitary appliances - Part 1: Requirements
EN 274-2:2002 卫生器具的下水管道配件.第2部分:试验方法 Waste fittings for sanitary appliances - Part 2: Test methods
EN 274-3:2002 卫生器具的下水管道配件.第3部分:质量控制 Waste fittings for sanitary appliances - Part 3: Quality control
EN 28394:1990 房产建筑.接合产品.1种成份密封胶挤压性的测定 Building construction - Jointing products - Determination of extrudability of one-component sealants (ISO 8394:1988)
EN 28970:1991 木结构.用机械部件实现的接头试验.有关木材密度的要求 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989)
EN 29048:1990 建房工程.接合产品.用标准仪器测定密封胶的挤压性 Building construction - Jointing products - Determination of extrudability of sealants using standardized apparatus (ISO 9048:1987)
EN 29052-1:1992 声学.动态刚性的测定.第1部分:住宅架空地板下使用的材料 Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
EN 297:1994 使用气体燃料的集中供热锅炉.装有标称热值小于或等于70kW的大气燃烧器的B11和B11BS型锅炉 Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 297:1994/A2:1996 EN 297:1994的第2次补充件 Gas-fired central heating boilers - Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 297:1994/A3:1996 NF EN 297-1994的修改件3 Gas-fired central heating boilers - Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 297:1994/A4:2004 NF EN 297-1994的修改件4 Gas-fired central heating boilers - Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 297:1994/A5:1998 NF EN 297-1994的修改件5 Gas-fired central heating boilers - Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 297:1994/A6:2003 NF EN 297-1994的修改件6 Gas-fired central heating boilers - Type B11 and B11BS boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW
EN 30-1-4:2002/A1:2006 EN 30-1-4:2002的第一次补充件 Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having one or more burners with an automatic burner control system
EN 303-1:1999 采暖锅炉 第1部分:带鼓风机喷嘴的采暖锅炉 术语、通用要求、试验和标记 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 303-1:1999/A1:2003 EN 303-1:1999的第一次补充件 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
EN 303-2:1998 加热锅炉 第2部分:带鼓风机喷嘴的加热锅炉 带油雾化喷嘴的锅炉特殊要求 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
EN 303-2:1998/A1:2003 EN 303-2:1998的第一次补充件 Heating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners
EN 303-3:1998 采暖锅炉 第3部分：燃气集中加热锅炉 包括锅炉主体和动力调风燃烧器在内的成套设备 Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner
EN 303-3:1998/A2:2004 EN 303-3:1998的第一次补充件 Heating Boilers - Part 3 : Gas-fired heating boilers - Assembly comprising a boiler body and a forced draught burner
EN 303-4:1999 采暖锅炉.第4部分:带鼓风机喷嘴的采暖锅炉.燃油锅炉输出功率70kW和最大操作压力3bar的特殊要求.术语、要求、试验和标记 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
EN 303-5:1999 供暖锅炉.第5部分:额定热量输出到300KW的手工和自动进固体燃料的供暖锅炉.术语、要求、试验和标记 Heating boilers - Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 300 kw - Terminology, requirements, testing and marking
EN 303-6:2000 加热锅炉.第6部分:带鼓风机的采暖锅炉.带标准热输入不超过70kW的燃油锅炉的复合式锅炉的家用热水操作的特殊要求 Heating boilers - Part 6: Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
EN 303-7:2006 Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kW
EN 304:1992 加热锅炉 带雾化油燃烧器的供暖锅炉的检验规范 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 304:1992/A1:1998 NF EN 304-1993的修改件1 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 304:1992/A2:2003 NF EN 304-1993的修改件2 Heating boilers - Test code for heating boilers for atomizing oil burners
EN 31:1998 盥洗台.连接尺寸 Pedestal wash basins - Connecting dimensions
EN 32:1998 挂壁式盥洗台.墙壁紧固螺栓的连接尺寸 Wall-hung wash basins - Connecting dimensions
EN 33:2003 带冲洗水箱的坐式冲便器水箱 连接尺寸 Pedestal W.C. pans with close-coupled flushing cistern - Connecting dimensions
EN 34:1992 盥洗盆 Wall hung W.C. pan with close coupled cistern - Connecting dimensions
EN 35:2000 单一上供水台架式坐浴盆.连接尺寸 Pedestal bidets with over-rim supply - Connecting dimensions
EN 36:1998 从上面供水的挂壁式坐浴盆.连接尺寸 Wall-hung bidets with overrim supply - Connecting dimensions
EN 37:1998 自由冲水的坐式抽水马桶的水箱.连接尺寸 Pedestal WC pans with independent water supply - Connecting dimensions
EN 38:1992 单独供水的盥洗盆 Wall hung W.C. pan with independent water supply - Connecting dimensions
EN 380:1993 木结构.试验方法 Timber structures - Test methods - General principles for static load testing
EN 383:2007 木材结构 试验方法 榫型紧固件嵌入强度和基础值的测定 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
EN 39:2001 支撑和工作支架用钢管.交货技术条件 Loose steel tubes for tube and coupler scaffolds - Technical delivery conditions
EN 40-3-1:2000 电线杆 第3-1部分：设计和验证 特性负荷规范 Lighting columns - Part 3-1: Design and verification - Specification for characteristic loads
EN 40-3-2:2000 电线杆 第3-2部分：设计与验证 试验验证 Lighting columns - Part 3-2: Design and verification - Verification by testing
EN 408:2003 木结构 结构木材和胶合板 某些物理和力学性能的测定 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
EN 409:1993 木结构.试验方法 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners - Nails
EN 413-1:2004 圬工水泥 第1部分：水泥的成分、规格和合格指标 Masonry cement - Part 1: Composition, specifications and conformity criteria
EN 413-2:2005 砌工水泥.第2部分:试验方法 Masonry cement - Part 2: Test methods
EN 437:2003 测试气体 试验压力 设备类别 Test gases - Test pressures - Appliance categories
EN 442-1:1995 散热器和对流散热器.第1部分:规范和技术要求 Radiators and convectors - Part 1: Technical specifications and requirements
EN 442-1:1995/A1:2003 EN 442-1:1995的第一次补充件 Radiators and convectors - Part 1: Technical specifications and requirements
EN 442-2:1996 散热器和换流器.第2部分:测试方法和额定值 Radiators and convectors - Part 2: Test methods and rating
EN 442-2:1996/A1:2000 EN 442-2:1996的第一次补充件 Radiators and convectors - Part 2: Test methods and rating
EN 442-2:1996/A2:2003 EN 442-2:1997的第一次补充件 Radiators and convectors - Part 2: Test Methods and rating
EN 442-3:2003 散热器和对流散热器 第3部分: 符合性评定 Radiators and convectors - Part 3: Evaluation of conformity
EN 445:1996 预应力电缆用熔融金属.试验方法 Grout for prestressing tendons - Test methods
EN 446:1996 预应力电缆用熔融金属.熔融金属浇注程序 Grout for prestressing tendons - Grouting procedures
EN 447:1996 预应力电缆用熔融金属.常用熔融金属规定 Grout for prestressing tendons - Specification for common grout
EN 450-1:2005 混凝土用飞灰 定义、规范和合格判据 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
EN 450-2:2005 混凝土用飞灰 第2部分：合格证定 Fly ash for concrete - Part 2: Conformity evaluation
EN 451-1:2003 飞灰的试验方法 第1部分：游离氧化钙的测定 Method of testing fly ash - Part 1: Determination of free calcium oxide content
EN 451-2:1994 飞灰的试验方法.第2部分:湿筛选细度 Method of testing fly ash - Part 2: Determination of fineness by wet sieving
EN 459-1:2001 建筑石灰.第1部分:定义、规范和合格准则 Building lime - Part 1: Definitions, specifications and conformity criteria
EN 459-2:2001 建筑石灰.第2部分:试验方法 Building lime - Part 2: Test methods
EN 459-3:2001 建筑石灰.第3部分:合格评定 Building lime - Part 3: Conformity evaluation
EN 480-1:2006 混凝土、灰浆和压紧灰浆掺和物.试验方法.第10部分:水溶氯化物含量测定 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
EN 480-10:1996 混凝土、砂浆和泥浆混合物的试验方法.第10部分:氯化物的含量测定 Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content
EN 480-11:2005 混凝土、砂浆和灰浆添加剂 试验方法 第11部分：硬化后混凝土中气隙参数测定 Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
EN 480-12:2005 混凝土、砂浆和灰浆添加剂 试验方法 第12部分：添加剂中碱含量的测定 Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
EN 480-13:2002 混凝土 砂浆和泥浆混合物的试验方法 第13部分:试验砂浆混合物的参考砖石工程砂浆 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
EN 480-14:2006 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test
EN 480-2:2006 混凝土、砂浆和泥浆混合物的试验方法 第2部分：凝固时间的测定 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
EN 480-4:2005 混凝土、砂浆和泥浆混合物 试验方法 第4部分：混凝土泌浆的测定 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete
EN 480-5:2005 混凝土、砂浆和灰浆添加剂 试验方法 第5部分：毛细管吸收率的测定 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption
EN 480-6:2005 混凝土、砂浆和灰浆添加剂 试验方法 第6部分：红外分析法 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
EN 480-8:1996 混凝土、砂浆和泥浆混合物的试验方法.第8部分:液体混合物密度的测定 Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
EN 483:1999 燃气的集中供热锅炉.公称热输入量不超过70KW的C型锅炉 Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW
EN 483:1999/A2:2001 EN 483:1999的第2次补充件 Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW
EN 490:2004 屋面混凝土瓦和配件 产品规格 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 490:2004/A1:2006 EN 490:2004的第一次补充件 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications
EN 491:2004 屋面混凝土瓦和配件 试验方法 Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
EN 492:2004 屋面用纤维水泥板及其附件 产品规格和试验方法 Fibre-cement slates and fittings - Product specification and test methods
EN 492:2004/A1:2005 EN 492:2004的第1次补充件 Fibre-cement slates and fittings - Product specification and test methods
EN 492:2004/A2:2006 EN 492:2004的第2次补充件 Fibre cement slates and fittings - Product specification and test methods
EN 494:2004+A3:2007 EN 492:2004的第3次补充件 Fibre-cement profiled sheets and fittings - Product specification and test methods
EN 495-5:2000 防水挠性薄板.低温弯曲性能测定.第5部分:屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
EN 501:1994 金属薄板的屋面制品 锌薄板的全支撑屋面制品 Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet
EN 502:1999 金属薄板屋顶制品.不锈钢薄板制全支撑屋顶制品规范 Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
EN 504:1999 金属薄板制屋顶制品.铜薄板制全支撑屋顶制品规范 Roofing products from metal sheet - Specification for fully supported roofing products of copper sheet
EN 505:1999 金属薄板制屋顶制品.钢薄板制全支撑屋顶制品规范 Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
EN 506:2000 金属板屋顶产品.铜锌板自支持产品规范 Roofing products from metal sheet - Specification for self-supporting products of copper or zinc sheet
EN 507:1999 金属薄板制屋顶制品.铝薄板制全支撑屋顶制品规范 Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet
EN 508-1:2000 金属板屋顶产品.钢铝或不锈钢板的自支持产品规范.第1部分:钢 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
EN 508-2:2000 金属板屋顶产品.钢铝或不锈钢板的自支持产品规范.第2部分:铝 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
EN 508-3:2000 金属板屋顶产品.钢铝或不锈钢板的自支持产品规范.第3部分:不锈钢 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 516:2006 屋顶顶盖预制附件.屋顶通道的安装.步桥.踏板.单踏板 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN 517:2006 预制屋面附件.屋顶安全钩 Prefabricated accessories for roofing - Roof safety hooks
EN 520:2004 石膏纸板 种类, 要求, 检验 Gypsum plasterboards - Definitions, requirements and test methods
EN 523:2003 钢丝束用带钢制护套 术语、规定、质量检验 Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control
EN 524-1:1997 钢丝束用带钢制护套 试验方法 第1部分: 形状和尺寸的测定 Steel strip sheaths for prestressing tendons - Test methods - Part 1: Determination of shape and dimensions
EN 524-2:1997 钢丝束用带钢制护套 试验方法 第2部分: 弯曲性能测定 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour
EN 524-3:1997 钢丝束用带钢制护套 试验方法 第3部分: 两个方向的弯曲试验 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test
EN 524-4:1997 钢丝束用带钢制护套 试验方法 第4部分: 耐侧向负载性的测定 Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance
EN 524-5:1997 钢丝束用带钢制护套 试验方法 第5部分: 抗拉强度的测定 Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance
EN 524-6:1997 钢丝束用带钢制护套 试验方法 第6部分: 密封性的测定(水损失性的测定) Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss)
EN 525:1997 热输入不超过300KW的空间加热用非家用直接燃气式强制对流空气加热器 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
EN 534:2006 带瓦楞的沥青层(欧洲标准EN 534) Corrugated bitumen sheets - Product specification and test methods
EN 536:1999 筑路车辆.沥青混合成套设备.安全要求.(EN 536) Road construction machines - Asphalt mixing plants - Safety requirements
EN 538:1994 不连续铺设用陶土瓦 抗挠强度试验 Clay roofing tiles for discontinuous laying - Flexural strength test
EN 539-1:2005 不连续铺设用屋面陶土瓦 物理特性的测定 第1部分:不渗透性试验 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 1: Impermeability test
EN 539-2:2006 不连续铺设的陶土屋面瓦.物理特性测定.第2部分:耐霜冻试验 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance
EN 544:2005 矿物油和/或合成材料增强的沥青盖屋板(欧洲标准EN544) Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods
EN 58:2004 沥青和含沥青粘结晶剂 含沥青粘结剂的取样 Bitumen and bituminous binders - Sampling bituminous binders
EN 594:1995 木材结构.试验方法.木框架墙加强板刚度和强度的试验 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels
EN 595:1995 木材结构.试验方法.强度和刚性测定用构架试验 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour
EN 596:1995 木材结构,试验方法.木构架墙上软体撞击试验 Timber structures - Test methods - Soft body impact test of timber framed walls
EN 607:2004 聚氯乙烯(PVC-U)檐沟和附件 定义、要求和试验 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
EN 612:2005 轧制金属制雨水檐构和落水槽.定义、分类和规范 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
EN 625:1995 使用气体燃料的中心供暖锅炉--额定热输入不超过70kW的家庭复式锅炉的热水操作具体要求 Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW
EN 627:1995 升降机.电梯和乘客输送机的数据记录和监控规范 Specification for data logging and monitoring of lifts, escalators and passenger conveyors
EN 650:1996 弹性覆面层.黄麻或聚酯作支撑物或者带聚氯乙烯衬里的聚酯为支撑物的聚氯乙烯覆面层.规范 Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing - Specification
EN 652:1996 弹性覆面层.带主要成分为软木的支撑物的聚氯乙烯地面覆层.规范 Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification
EN 653:1996 弹性覆面层.膨胀聚氯乙烯地面覆层.规范 Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification
EN 655:1996 弹性覆面层.带聚氯乙烯磨损层的软木粘结面板.规范 Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification
EN 656:1999 燃气集中供暖锅炉.标称热量输入大于70kW而不超过300kW的B类锅炉 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW but not exceeding 300 kW
EN 656:1999/A1:2006 EN 656:1999的第一次补充件 Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW
EN 672:1996 有弹性的铺地物--聚集软木表观密度的测定 Resilient floor coverings - Determination of apparent density of agglomerated cork
EN 677:1998 燃气集中供暖锅炉.额定热输入不超过70kW的冷凝锅炉的特殊要求 Gas-fired central heating boilers - Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW
EN 678:1993 热压处理过的气泡混凝土干密度的测定 Determination of the dry density of autoclaved aerated concrete
EN 679:2005 热压处理过的气泡混凝土抗压强度 Determination of the compressive strength of autoclaved aerated concrete
EN 680:2005 热压处理过的气泡混凝土干燥收缩性测定 Determination of the drying shrinkage of autoclaved aerated concrete
EN 684:1995 有弹性的铺地板.焊缝强度的测定 Resilient floor coverings - Determination of seam strength
EN 695:2005 厨房洗涤池.连接尺寸 Kitchen sinks - Connecting dimensions
EN 718:1995 有弹性的铺地物.以聚氯乙烯为主要成分的铺地物加固物或支撑物的表面质量的测定 Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings
EN 74-1:2005 连接器 脚手架的定位锁和底板 第1部分：要求和试验程序 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
EN 74-3:2007 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures
EN 771-1:2003 砌块 第1部分：粘土砌块 Specification for masonry units - Part 1: Clay masonry units
EN 771-1:2003/A1:2005 EN 771-1:2003的第一次补充件 Specification for masonry units - Part 1: Clay masonry units
EN 771-2:2003 砌块 第2部分：硅酸钙砌块 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-2:2003/A1:2005 EN 771-2:2003的第一次补充件 Specification for masonry units - Part 2: Calcium silicate masonry units
EN 771-3:2003 砌块 第3部分：混凝土砌块(致密和轻质骨料) Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
EN 771-3:2003/A1:2005 EN 771-3:2003的第一次补充件 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)
EN 771-4:2003 砌块 第4部分：加气混凝土砌块 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-4:2003/A1:2005 EN 771-4:2003的第一次补充件 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
EN 771-5:2003 砌块 第5部分：成品混凝土砌块 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-5:2003/A1:2005 EN 771-5:2003的第一次补充件 Specification for masonry units - Part 5: Manufactured stone masonry units
EN 771-6:2005 砌块 第6部分：天然石料 Specification for masonry units - Part 6: Natural stone masonry units
EN 772-1:2000 圬工单元试验方法.第1部分:压缩强度测定 Methods of test for masonry units - Part 1: Determination of compressive strength
EN 772-10:1999 圬工单位的试验方法.第10部分:硅酸钙和高压蒸养加气混凝土结构含水量的测定 Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units
EN 772-11:2000 圬工单元试验方法.第11部分:集料混凝土,加工石材和天然石材圬工单元毛细吸水的测定及石膏圬工单元水初始吸收速率的测定 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 772-11:2000/A1:2004 EN 772-11:2000的第一次补充件 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
EN 772-13:2000 圬工单元试验方法.第13部分:圬工单位净和毛干密度测定(天然石材除外) Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone)
EN 772-14:2001 砌块的试验方法 第14部分：聚合混凝土和人造石料砌块的湿度变化的测定 Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units
EN 772-15:2000 圬工单元试验方法.第15部分:蒸压充气混凝土圬工单位水蒸汽渗透性的测定 Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units
EN 772-16:2000 圬工单元试验方法.第16部分:尺寸测定 Methods of test for masonry units - Part 16: Determination of dimensions
EN 772-16:2000/A1:2004 EN 772-16:2000的第1次补充件 Methods of test for masonry units - Part 16: Determination of dimensions
EN 772-16:2000/A2:2005 EN 772-16:2000的第2次补充件 Methods of test for masonry units - Part 16: Determination of dimensions
EN 772-18:2000 圬工单元试验方法.第18部分:硅酸盐圬工单元耐冻溶性测定 Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units
EN 772-19:2000 圬工单元试验方法.第19部分:大型水平打孔的粘土圬工单元潮气扩散的测定 Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units
EN 772-2:1998 圬工设施试验方法.第2部分:集成混凝土圬工设施空隙面积百分比测定(纸刻痕法) Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation)
EN 772-2:1998/A1:2005 EN 772-2:1998的第一次补充件 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation)
EN 772-20:2000 圬工单元试验方法.第20部分:集料混凝土,加工石材和天然石材圬工单元表面平坦度测定 Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units
EN 772-20:2000/A1:2005 EN 772-20:2000的第一次补充件 Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units
EN 772-3:1998 圬工设施试验方法.第3部分:静流称重法测定粘土圬工设施中的空隙百分率和净容积 Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing
EN 772-4:1998 圬工设施试验方法.第4部分:天然石圬工设施总的和开式多孔性的测定及实际密度和松密度测定 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
EN 772-5:2001 圬工单元试验方法.第5部分:粘土圬工单元中活性可溶盐含量的测定 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
EN 772-6:2001 圬工品试验方法.第6部分:集料混凝土圬工品弯曲拉伸强度测定 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete maso
|
|
|
|
