| CEN欧洲标准_建筑物和建筑材料(四) [2007-9-26] |
EN 772-7:1998 圬工设施试验方法.第7部分:水沸腾法测定粘土圬工防潮设施的吸水率 Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water
EN 772-9:1998 圬工设施试验方法.第9部分:沙充填法测定硅酸钙圬工设施的体积、空隙百分率和净容积 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
EN 772-9:1998/A1:2005 EN 772-9:1998的第一次补充件 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
EN 779:2002 一般通用微粒空气过滤器--要求,试验和标记 Particulate air filters for general ventilation - Determination of the filtration performance
EN 791:1995 钻机.安全性 Drill rigs - Safety
EN 80:2001 壁挂式便器.连接尺寸 Wall-hung urinals - Connecting dimensions
EN 806-1:2000 建筑物内部人用水供应设备规范.第1部分:总则 Specifications for installations inside buildings conveying water for human consumption - Part 1: General
EN 806-1:2000/A1:2001 EN 806-1:2000的第一次补充件 Specifications for installations inside buildings conveying water for human consumption - Part 1: General
EN 806-2:2005 建筑物内部人类生活用水输送设备规范.第2部分:设计 Specification for installations inside buildings conveying water for human consumption - Part 2: Design
EN 806-3:2006 建筑物内部人类生活用水输送设备规范.第3部分:管尺寸.简化法 Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method
EN 810:1997 用电动马达驱动的压缩机式去湿机 性能试验、标志、运行要求和技术数据表 Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet
EN 81-1:1998 电梯结构和安装的安全规则 第1部分：客货电梯 Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN 81-1:1998/A1:2005 EN 81-1:1998的第1次补充件 Safety rules for the construction and installation of lifts - Part 1: Electric lifts
EN 81-1:1998/A2:2004 EN 81-1:1998的第2次补充件 Safety rules for the construction and installation of lifts - Part 1: Electric lifts - A2: Machinery and pulley spaces
EN 81-2:1998 电梯结构和安装的安全规则 第2部分：液压式载人和载货电梯 Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts
EN 81-2:1998/A1:2005 EN 81-2:1998的第1次补充件 Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts
EN 81-2:1998/A2:2004 EN 81-2:1998的第2次补充件 Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces
EN 81-28:2003 电梯建造和安装的安全规则 客运和货运电梯 第28部分：客运和货运电梯上的远程警报器 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts
EN 81-3:2000 电梯建造和安装的安全规则.第3部分:电动和液压电梯 Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts
EN 815:1996/A1:2005 EN 815:1996的第一次补充件 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock
EN 81-58:2003 电梯制造和安装的安全规则 检查和试验 第58部分：井道门阻燃性能试验 Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test
EN 816:1996 卫生间管龙头装置.自动关闭阀 PN 10 Sanitary tapware - Automatic shut-off valves PN 10
EN 817:1997 卫生器具.机械式搅拌器(PN 10).通用技术规范 Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications
EN 81-70:2003 电梯制造和安装的安全规则 客货电梯的特殊应用 第70部分：人员包括伤疾人进入电梯的方便性 Safety rules for the construction and installations of lifts - Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability
EN 81-70:2003/A1:2004 EN 81-70:2003的第一次补充件 Safety rules for the construction and installations of lifts - Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability
EN 81-71:2005+A1:2006 电梯结构和安装的安全规则 客货电梯的特殊应用 第71部分：耐损电梯(包含2006年的第一次补充件) Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
EN 81-72:2003 电梯结构和安装的安全规则 客货电梯的特殊应用 第72部分：消防电梯 Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts
EN 81-73:2005 电梯制造和安装的安全规则 客梯和货梯的特殊应用 第73部分：发生火灾时的性能 Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire
EN 81-80:2003 电梯制造和安装的安全规则 现有电梯 第80部分：提高现有客梯和货梯安全的规则 Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
EN 822:1994 用于建筑设备的绝热产品.长度和宽度的测定 Thermal insulating products for building applications - Determination of length and width
EN 823:1994 建筑设备用隔热制品 厚度的测定 Thermal insulating products for building applications - Determination of thickness
EN 824:1994 建筑设备用隔热制品 垂直度的测定 Thermal insulating products for building applications - Determination of squareness
EN 825:1994 建筑设备用绝热产品.平面度测定 Thermal insulating products for building applications - Determination of flatness
EN 826:1996 适用于建筑物设备的热绝缘产品.压缩性的测定 Thermal insulating products for building applications - Determination of compression behaviour
EN 832:1998 建筑物热性能.热能计算.住宅 Thermal performance of buildings - Calculation of energy use for heating - Residential buildings
EN 834:1994 记录受热体表面消耗值用供暖费分配器.带供电的设备 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply
EN 835:1994 房间散热器的消耗测定用配给器--在蒸发原理基础上的无供电设备 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle
EN 845-1:2003 砌墙辅件 第1部分：系杆、拉紧条、挂钩和支架 Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
EN 845-2:2003 砌墙辅件 第2部分：过梁 Specification for ancillary components for masonry - Part 2: Lintels
EN 845-3:2003 砌墙辅件 第3部分：钢丝网水平砌缝配筋 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
EN 846-10:2000 圬工辅助成份试验方法.第10部分:支架负载偏转特性和负载能力测定 Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets
EN 846-11:2000 圬工辅助部件试验方法.第11部分:尺寸测定和梁的弯曲 Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels
EN 846-13:2001 圬工辅助构件试验方法.第13部分:有机涂层耐冲击性、耐磨性及耐腐蚀性的测定 Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
EN 846-2:2000 圬工辅助成份试验方法.第2部分:灰浆粘结处预制床接头增强的粘结强度测定 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
EN 846-3:2000 圬工辅助成份试验方法.第3部分:预制床连接处增强的焊接剪切负载能力测定 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
EN 846-4:2001 圬工辅助部件试验方法.第4部分:托架载荷能力和加载变形特性测定 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps
EN 846-4:2001/A1:2004 EN 846-4:2001的第一次补充件 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps
EN 846-5:2000 圬工辅助成份试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性测定 Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test)
EN 846-6:2000 圬工辅助成份试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性测定(双端法) Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test)
EN 846-7:2000 圬工辅助成份试验方法.第7部分:拉伸和压缩负载容量和墙系柱和负载代替特性测定(单端法) Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
EN 846-8:2000 圬工辅助成份试验方法.第8部分:墙筋吊架处负载偏转特性和负载能力测定 Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
EN 846-8:2000/A1:2006 EN 846-8:2000的第一次补充件 Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers
EN 846-9:2000 圬工辅助成份试验方法.第9部分:梁的耐挠曲和耐剪切性测定 Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
EN 87:1991 陶瓷地板和墙瓷砖 定义、分类、特性和标志 Ceramic floor and wall tiles - Definitions, classification, characteristics and marking
EN 89:1999 家用的供热水的燃气储水式加热器 Gas-fired storage water heaters for the production of domestic hot water
EN 89:1999/A1:1999 EN 89:1999的第1次补充件 Gas-fired storage water heaters for the production of domestic hot water
EN 89:1999/A2:2000 EN 89:1999的第2次补充件 Gas-fired storage water heaters for the production of domestic hot water
EN 89:1999/A3:2006 EN 89:1999的第3次补充件 Gas-fired storage water heaters for the production of domestic hot water
EN 89:1999/A4:2006 EN 89:1999的第4次补充件 Gas-fired storage water heaters for the production of domestic hot water
EN 912:1999 木紧固件.木连接件规范 Timber fasteners - Specifications for connectors for timber
EN 932-1:1996 集料通用性能试验.第1部分:取样方法 Tests for general properties of aggregates - Part 1: Methods for sampling
EN 932-2:1999 集料一般特性试验.第2部分:实验室样品还原法 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
EN 932-3:1996/A1:2003 EN 932-3:1996的第一次补充件 Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description
EN 932-5:1999 集料一般特性试验.第5部分:通用设备和校准 Tests for general properties of aggregates - Part 5: Common equipment and calibration
EN 932-6:1999 集料一般特性试验.第6部分:复验性和再生性定义 Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility
EN 933-1:1997 集料几何性能的试验 第1部分:粒径分布测定--筛法 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-1:1997/A1:2005 EN 933-1:1997的第一次补充件 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 933-10:2001 集料的几何性能试验 第10部分：细屑评估 漏斗等级（空气喷射筛分） Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of fillers (air jet sieving)
EN 933-2:1995 测定集料几何性能的试验.第2部分:粒状测定--检验筛、开口的标称尺寸 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
EN 933-3:1997 测定集料几何性能的试验 第3部分:粒状测定--扁平系数 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-3:1997/A1:2003 EN 933-3:1997的第一次补充件 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
EN 933-4:1999 集料几何特性试验.第4部分:颗粒形状测定.形状索引 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
EN 933-5:1998 测定集料几何性能的试验 第5部分: 细砾石破碎表面百分比的测定 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
EN 933-5:1998/A1:2004 EN 933-5:1998的第一次补充件 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles
EN 933-6:2001 集料几何特性的试验.第6部分:颗粒形状的测定.集料流系数 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 933-7:1998 测定集料几何特性的试验.第7部分:含贝壳成分含量的测定--细砾石中贝壳的百分比 Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates
EN 933-8:1999 集料几何特性试验.第8部分:完整性评估,沙等效试验.(EN 933-8) Test for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
EN 933-9:1998 集料几何特性试验.第9部分:细集料评估.次甲基蓝试验 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
EN 934-2:2001 混凝土,灰浆和灌浆外加剂.第2部分:混凝土外加剂,定义,要求,符合性,标记和标签 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-2:2001/A1:2004 EN 934-2:2001的第1次补充件 Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling
EN 934-2:2001/A2:2005 EN 934-2:2001的第2次补充件 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
EN 934-3:2003 混凝土、砂浆和灰浆用外加剂.第3部分:砂浆外加剂.定义、要求、一致性、标记和贴标签 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
EN 934-4:2001 混凝土、砂浆和灌浆用添加剂.第4部分:预应力钢筋束用添加剂.定义、要求、符合性、标记和标签 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling
EN 934-4:2001/A1:2004 EN 934-4:2001的第一次补充件 Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling
EN 934-6:2001 混凝土,灰浆和灌浆混合物.第6部分:取样、合格控制及合格评定 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
EN 934-6:2001/A1:2005 EN 934-6:2001的第一次补充件 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity
EN 947:1998 卷帘门.耐垂直负荷的测定 Hinged or pivoted doors - Determination of the resistance to vertical load
EN 948:1999 转门.耐静力扭曲的测定 Hinged or pivoted doors - Determination of the resistance to static torsion
EN 949:1998 门的检验方法.门扇的软和重量物体碰撞试验 Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors
EN 950:1999 门扇.抗硬物冲击性的测定 Door leaves - Determination of the resistance to hard body impact
EN 951:1998 门扇.高宽厚及面积的测量方法 Door leaves - Method for measurement of height, width, thickness and squareness
EN 952:1999 门扇.平直性要求、测量方法 Door leaves - General and local flatness - Measurement method
EN 989:1995 "推出"试验法测定钢筋和高压蒸养加气混凝土间的胶合性能 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the "Push-Out" test
EN 991:1995 热压处理过的多孔混凝土或开结构式轻骨料混凝土制配钢筋的预制件尺寸测定 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
EN 992:1995 开结构式轻骨料混凝土干密度的测定 Determination of the dry density of lightweight aggregate concrete with open structure
EN 996:1995/A1:1999 EN 996:1995的第一次补充件 Piling equipment - Safety requirements
EN 996:1995/A2:2003 EN 996:1995的第2次补充件 Piling equipment - Safety requirements
EN 997:2003 带下水道虹吸闸门的抽水马桶水箱和套件 WC pans and WC suites with integral trap
EN 997:2003/A1:2006 EN 997:2003的第一次补充件 WC pans and WC suites with integral trap
EN 998-1:2003 圬土灰浆 第1部分：擦抹灰浆 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
EN 998-2:2003 圬土灰浆 第1部分：砌筑灰浆 Specification for mortar for masonry - Part 2: Masonry mortar
EN ISO 10052:2004 声学 使用器具声空气声和冲击声隔绝的现场测量 鉴定方法 Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2004)
EN ISO 10077-1:2006 门窗和百叶窗的热性能.热传递系数的计算.第1部分:简化法 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2006)
EN ISO 10077-2:2003 门、窗和百叶窗热性能 传热系数的计算 第2部分：数字框架法 Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2003)
EN ISO 10211-1:1995 建筑物中热桥.热流和表面温度.第1部分:一般计算方法 Thermal bridges in building construction - Heat flows and surface temperatures - Part 1: General calculation methods (ISO 10211-1:1995)
EN ISO 10211-2:2001 房屋建筑中的热桥.热流量和表面温度的计算.第2部分:线性热桥 Thermal bridges in building construction - Calculation of heat flows and surface temperatures - Part 2: Linear thermal bridges (ISO 10211-2:2001)
EN ISO 10426-1:2006 石油和天然气工业.油井灌浆用水泥和材料.第1部分:规范 Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2006)
EN ISO 10426-2:2003 石油和天然气工业 油井固井用水泥和材料 第2部分：井用水泥试验 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003)
EN ISO 10426-2:2003/A1:2005 EN ISO 10426-2:2003的第一次补充件 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements - Amendment 1: Water-wetting capability testing (ISO 10426-2:2003/A1:2005)
EN ISO 10426-3:2004 石油和天然气工业 油井固井用水泥和材料 第3部分：深水井水泥配方试验 Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2003)
EN ISO 10426-4:2004 石油和天然气工业 油井固井用水泥和材料 第4部分：在气压下发泡水泥浆的制备和试验 Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004)
EN ISO 10426-5:2005 石油和天然气工业 油井固井用水泥和材料 第5部分：大气压下油井水泥胀缩率的测定 Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004)
EN ISO 10456:1999 建筑材料和制品.确定申报和设计热值的程序 Building materials and products - Procedures for determining declared and design thermal values (ISO 10456:1999)
EN ISO 10545-1:1997 陶瓷砖 第1部分:抽样和验收条件 Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:1995)
EN ISO 10545-10:1997 陶瓷砖 第10部分:湿膨胀测定 Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995)
EN ISO 10545-11:1996 陶瓷方砖和面板.第11部分:釉砖抗龟裂性的测定 Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994)
EN ISO 10545-12:1997 陶瓷砖 第12部分:耐冰冻测定 Ceramic tiles - Part 12: Determination of frost resistance (ISO 10545-12:1995, including Technical Corrigendum 1:1997)
EN ISO 10545-13:1997 陶瓷砖 第13部分:耐化学测定 Ceramic tiles - Part 13: Determination of chemical resistance (ISO 30545-13:1995)
EN ISO 10545-14:1997 陶瓷砖 第14部分:耐污染测定 Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:1995, including Technical Corrigendum 1:1997)
EN ISO 10545-15:1997 陶瓷砖 第15部分:素烧砖释放出铅和镉的测定 Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995)
EN ISO 10545-16:2000 瓷砖.第16部分:小色差测定 Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:1999)
EN ISO 10545-2:1997 陶瓷砖 第2部分:尺寸和表面质量的测定 Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997)
EN ISO 10545-3:1997 陶瓷砖 第3部分:吸水率、表观气孔、表观相对密度和堆积密度的测定 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, including Technical Corrigendum 1:1997)
EN ISO 10545-4:1997 陶瓷砖 第4部分:断裂和破碎强度的模数测定 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:1995)
EN ISO 10545-6:1997 陶瓷砖 第6部分:素烧砖耐磨蚀测定 Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:1995)
EN ISO 10545-7:1998 瓷砖.第7部分:釉面砖表面耐磨损性测定.(EN ISO 10545-7) Ceramic tiles - Part 7: Determination of resistance to surface abrasion for glazed tiles (ISO 10545-7:1996)
EN ISO 10545-8:1996 陶瓷方砖和面板.第8部分:热源线性能膨胀的测定 Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:1994)
EN ISO 10545-9:1996 陶瓷方砖和面板.第9部分:耐热冲击强度的测定 Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:1994)
EN ISO 10563:2005 房屋建筑--接缝的密封剂--质量与容积变化的测定 Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005)
EN ISO 10590:2005 房屋建筑--密封剂--受水浸渍后保持延伸性的胶粘/粘合性能的测定 Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005)
EN ISO 10591:2005 房屋建筑--密封剂--受水浸渍后胶粘/粘合性能的测定 Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005)
EN ISO 10848-1:2006 声学 邻室间空气载声和冲击声的侧向传声实验室测量 第1部分：框架文件 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2006)
EN ISO 10848-2:2006 声学 邻室间空气载声和冲击声的侧向传声实验室测量 第2部分：连接处有小影响时轻型构件的应用 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2: Application to light elements when the junction has a small influence (ISO 10848-2:2006)
EN ISO 10848-3:2006 声学 邻室间空气载声和冲击声的侧向传声实验室测量 第3部分：连接处有实质性影响时轻型构件的应用 Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence (ISO 10848-3:2006)
EN ISO 11431:2002 连接产品. 经玻璃窗照射后连续拉力附着粘度试验 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002)
EN ISO 11432:2005 房屋建筑.密封剂.抗压缩测定 Building construction - Sealants - Determination of resistance to compression (ISO 11432:2005)
EN ISO 11600:2003 连接产品.接合部的水密性密封剂 Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002)
EN ISO 11654:1997 声学.建筑物用吸音器.吸音额定值 Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997)
EN ISO 11820:1996 声学.现场消声器的测量 Acoustics - Measurements on silencers in situ (ISO 11820:1996)
EN ISO 12241:1998 建筑设备和工业装置绝热.计算规则 Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:1998)
EN ISO 12567-1:2000 门窗热性能.热盒法测定热传输.第1部分:完整门窗 Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 1: Complete windows and doors (ISO 12567-1:2000)
EN ISO 12567-2:2005 窗和门的温度性能 用热箱法测定传热系数 第2部分：天窗及其他凸出窗 Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005)
EN ISO 12569:2000 建筑热性能.空气交流的测定.追踪气体法 Thermal insulation in buildings - Determination of air change in buildings - Tracer gas dilution method (ISO 12569:2000)
EN ISO 12570:2000 建筑材料和产品的湿热性能.通过升温干燥测定潮气含量的 Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000)
EN ISO 12571:2000 建筑材料的湿热性能.湿热吸收特性测定 Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties (ISO 12571:2000)
EN ISO 12572:2001 建筑材料和产品的冷热性能.水蒸气传输性能测定 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties (ISO 12572:2001)
EN ISO 12944-3:1998 色漆和清漆 防护漆体系对钢结构的腐蚀防护 第3部分:设计内容 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:1998)
EN ISO 12944-5:1998 色漆和清漆 防护漆体系对钢结构的腐蚀保护 第5部分：防护漆体系 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:1998)
EN ISO 12944-7:1998 色漆和清漆 防护漆体系对钢结构的腐蚀防护 第7部分:涂漆工艺的实施和管理 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:1998)
EN ISO 13370:1998 建筑物热性能.经由地面的热传递.计算方法(EN 13370) Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:1998)
EN ISO 13786:1999 建筑物组件的热性能.动态热特性.计算方法 Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:1999)
EN ISO 13787:2003 建筑设备和工业装置的绝热制品 标称热导率的测定 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
EN ISO 13788:2001 建筑元部件的湿热性能.防止临界表面潮湿和填隙式冷凝的内表面温度.计算方法 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2001)
EN ISO 13789:1999 建筑物热性能.传输热力损失系数.计算方法 Thermal performance of buildings - Transmission heat loss coefficient - Calculation method (ISO 13789:1999)
EN ISO 13790:2004 建筑物热性能 空间加热能量的计算 Thermal performance of buildings - Calculation of energy use for space heating (ISO 13790:2004)
EN ISO 13791:2004 建筑物热性能 夏季无机械制冷的室内温度计算 一般准则和确认程序 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2004)
EN ISO 13792:2005 建筑物热性能 夏季无机械制冷的室内温度计算 简化法 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2005)
EN ISO 13793:2001 建筑热工学.为避免霜冻墙壁壳起的热学设计 Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001)
EN ISO 140-1:1997 声学.建筑物和建筑元件的隔音测量.第1部分:抑制侧向传输的试验室试验设施要求 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission (ISO 140-1:1997)
EN ISO 140-1:1997/A1:2004 EN ISO 140-1:1997的第一次补充件 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission - Amendment 1: Specific requirements on the frame of the test opening for lightweight twin leaf partitions (ISO 140-1:1997/AM 1:2004)
EN ISO 140-11:2005 声学 建筑物和建筑构件的隔声测量 第11部分：轻质基准地板上降低地面装饰发出冲击声的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors (ISO 140-11:2005)
EN ISO 140-14:2004 声学 建筑物和建筑构件的隔声测量 第14部分：工地特殊条件导则 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field (ISO 140-14:2004)
EN ISO 140-16:2006 声学 建筑物和建筑构件的隔声测量 第16部分：通过加内衬改善降音指数的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 16: Laboratory measurement of the sound reduction index improvement by additional lining (ISO 140-16:2006)
EN ISO 140-18:2006 声学 建筑物和建筑构件的隔声测量 第18部分：降雨在建筑构件上产生的声音的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18: Laboratory measurement of sound generated by rainfall on building elements (ISO 140-18:2006)
EN ISO 140-3:1995 声学.建筑物和建筑构件隔声性能的测量.第3部分:建筑构件空中声音衰减的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements (ISO 140-3:1995)
EN ISO 140-3:1995/A1:2004 EN ISO 140-3:1995的第一次补充件 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements - Amendment 1: Installation guidelines for lightweight twin leaf partitions (ISO 140-3:1995/AM 1:2004)
EN ISO 140-4:1998 声学.建筑物和建筑元件的隔音测量.第4部分:房间之间气载噪声隔音的现场测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms (ISO 140-4:1998)
EN ISO 140-5:1998 声学.建筑物和建筑元件的隔音测量.第5部分:正面元件和正面的气载噪声隔音的现场测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of fa?ade elements and fa?ades (ISO 140-5:1998)
EN ISO 140-6:1998 声学.建筑物和建筑元件的隔音测量.第6部分:地板冲击声隔音的试验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors (ISO 140-6:1998)
EN ISO 140-7:1998 声学.建筑物和建筑元件的隔音测量.第7部分:地板冲击声隔音的现场测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation of floors (ISO 140-7:1998)
EN ISO 140-8:1997 声学--建筑物和建筑构件的隔音测量 第8部分:通过在重型标准地板上铺设地板覆盖物来减少传播的碰撞噪声的实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor (ISO 140-8:1997)
EN ISO 14683:1999 建筑物结构中的热桥.线性热阀门.简化方法和省略补充 Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO 14683:1999)
EN ISO 14713:1999 结构中铁和钢的防腐.锌和铝镀层.指南 Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999)
EN ISO 15148:2002 建筑材料和制品湿热性能 以部分浸入测定吸水系数 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002)
EN ISO 15186-1:2003 声学 用声强作建筑物和建筑构件的隔声测量 第1部分: 实验室测量 Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1: Laboratory measurements (ISO 15186-1:2000)
EN ISO 15630-1:2002 混凝土钢筋和预应力钢筋用钢.试验方法.第1部分:钢筋、细钢筋和钢丝 Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2002)
EN ISO 15630-2:2002 混凝土钢筋和预应力钢筋用钢.试验方法.第2部分:焊接钢丝网 Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric (ISO 15630-2:2002)
EN ISO 15630-3:2002 混凝土钢筋和预应力钢筋用钢.试验方法.第3部分:预应力钢筋 Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2002)
EN ISO 15874-1:2003 冷热水设备用塑料管道系统 聚丙烯(PP) 第1部分：总则 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003)
EN ISO 15874-1:2003/A1:2007 EN ISO 15874-1:2003的第一次补充件 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1 (ISO 15874-1:2003/Amd 1:2007)
EN ISO 15874-2:2003 冷热水设备用塑料管道系统 聚丙烯(PP) 第2部分：管 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003)
EN ISO 15874-2:2003/A1:2007 EN ISO 15874-2:2003的第一次补充件 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2003/Amd 1:2007)
EN ISO 15874-3:2003 冷热水设备用塑料管道系统 聚丙烯(PP) 第3部分：管件 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)
EN ISO 15874-5:2003 冷热水设备用塑料管道系统 聚丙烯(PP) 第3部分：系统的适用性 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003)
EN ISO 15875-1:2003 冷热水装置用塑料管道系统 交联聚乙烯(PE-X) 第1部分：总则 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003)
EN ISO 15875-1:2003/A1:2007 EN ISO 15875-1:2003的第一次补充件 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1 (ISO 15875-1:2003/Amd 1:2007)
EN ISO 15875-2:2003 冷热水装置用塑料管道系统 交联聚乙烯(PE-X) 第2部分：管 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003)
EN ISO 15875-2:2003/A1:2007 EN ISO 15875-2:2003的第一次补充件 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes - Amendment 1 (ISO 15875-2:2003/Amd 1:2007)
EN ISO 15875-3:2003 冷热水装置用塑料管道系统.交联聚乙烯.配件 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
EN ISO 15875-5:2003 冷热水装置用塑料管道系统.交联聚乙烯.系统的适用性 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
EN ISO 15876-1:2003 冷热水装置用塑料管道系统 聚丁烯(PB) 第1部分：总则 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003)
EN ISO 15876-1:2003/A1:2007 EN ISO 15876-1:2003的第一次补充件 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General - Amendment 1 (ISO 15876-1:2003/Amd 1:2007)
EN ISO 15876-2:2003 冷热水装置用塑料管道系统 聚丁烯(PB) 第2部分：管 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003)
EN ISO 15876-2:2003/A1:2007 EN ISO 15876-2:2003的第一次补充件 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes - Amendment 1 (ISO 15876-2:2003/Amd 1:2007)
EN ISO 15876-3:2003 冷热水装置用塑料管道系统 聚丁烯(PB) 第3部分：管件 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003)
EN ISO 15876-5:2003 冷热水装置用塑料管道系统 聚丁烯(PB) 第5部分：系统适用性 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
EN ISO 15877-1:2003 塑料.热水和冷水压力输送用CPVC或PVCC管道系统,规范.第1部分:管子 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003)
EN ISO 15877-2:2003 塑料.热水和冷水压力输送用CPVC或PVCC管道系统.规范.第2部分:接头 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003)
EN ISO 15877-3:2003 冷热水装置用塑料管道系统 氯化聚氯乙烯(PVC-C) 第3部分：管件 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003)
EN ISO 15877-5:2003 冷热水装置用塑料管道系统 氯化聚氯乙烯(PVC-C) 第5部分：系统适用性 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003)
EN ISO 15927-1:2003 建筑的温湿性能 气候数据的计算与表示 第1部分：单个气象要素的月和年平均值 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements (ISO 15927-1:2003)
EN ISO 15927-4:2005 建筑的温湿性能 气候数据的计算与表示 第4部分：评估冷却与加热系统年能耗的数据 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005)
EN ISO 15927-5:2004 建筑的温湿性能 气候数据的计算与表示 第5部分：房间设计热负荷数据 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004)
EN ISO 16032:2004 声学 大楼服务设备发出声压级的测量 工程法 Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method (ISO 16032:2004)
EN ISO 16484-6:2005 大楼自动化和控制系统 第6部分：数据通信一致性试验 Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2005)
EN ISO 1716:2002 建筑物着火反应试验.燃烧热量测定 Reaction to fire tests for building products - Determination of the heat of combustion (ISO 1716:2002)
EN ISO 18233:2006 声学 建筑和房间方法声学新测量方法的应用 Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)
EN ISO 19432:2006 建筑施工机械和设备 便携式、手持内燃机驱动的型材切割机 安全要求和试验 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)
EN ISO 3382:2000 礼堂混响时间的测定。 Acoustics - Measurements of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997)
EN ISO 354:2003 声学 混响室中声吸收的测量 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
EN ISO 3822-1:1999 声学.供水装置和设备噪音的实验室测试.第1部分:测量方法 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
EN ISO 3822-2:1995 声学.水分配设备中使用的阀门和液压装置发出的声音的实验室测量.第2部分:出水龙头和阀门的安装及工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
EN ISO 6946:1996 建筑构件和建筑元件.耐热性和导热性.计算方法(欧洲标准 EN ISO 6946) Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996)
EN ISO 6946:1996/A1:2003 EN ISO 6946:1996的第一次补充件 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:1996/Amd. 1:2003)
EN ISO 717-1:1996 声学.建筑物和建筑物构件的隔音参数.第1部分:气载声隔音(欧洲标准EN ISO 717-1) Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:1996)
EN ISO 717-1:1996/A1:2006 EN ISO 717-1:1996的第一次补充件 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation - Amendment 1: Rounding rules related to single number ratings and single number quantities (ISO 717-1:1996/AM 1:2006)
EN ISO 717-2:1996 声学 建筑物和建筑构件隔音性的评定 第2部分:防止冲击噪声 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996)
EN ISO 717-2:1996/A1:2006 EN ISO 717-2:1996的第一次补充件 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation - Amendment 1 (ISO 717-2:1996/AM 1:2006)
EN ISO 7345:1995 热绝缘.物理量和定义 Thermal insulation - Physical quantities and definitions (ISO 7345:1987)
EN ISO 7389:2003 建房工程.接合产品.耐灵活修理性的测定 Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002)
EN ISO 7390:2003 建房工程.接合产品.抗漏泄性测定 Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2003)
EN ISO 8339:2005 建房工程.接合产品.密封胶--拉伸下变形性能的测定 Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005)
EN ISO 8340:2005 建房工程.接合产品.密封胶--持续拉伸下变形性能的测定 Building construction - Sealants - Determination of tensile properties at maintained extension (ISO 8340:2005)
EN ISO 8795:2001 人饮用水输送用塑料管道系统.移动评估.塑料管件和配件及其接头移动值的测定 Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001)
EN ISO 9046:2004 建房工程.密封胶.恒中温下粘合/附着性能的测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)
EN ISO 9047:2003 房屋建筑.密封剂.在变化温度下粘接/附着特性的测定 Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants at variable temperatures (ISO 9047:2001)
EN ISO 9251:1995 热绝缘.材料热传输条件和性能.词汇 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary (ISO 9251:1987)
EN ISO 9288:1996 热绝缘.辐射传热.物理量和定义 Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989)
EN ISO 9346:1996 热绝缘.质量传递.物理量和定义 Thermal insulation - Mass transfer - Physical quantities and definitions (ISO 9346:1987)
ENV 1090-1:1996 钢结构制作 第1部分：一般规则和建筑物用规则 Execution of steel structures - Part 1: General rules and rules for buildings
ENV 1090-2:1998 钢结构制作 第2部分：冷加工薄标准条和板的补充规则 Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and sheeting
ENV 1090-3:1997 钢结构制作 第3部分：高生产压力钢的补充规则 Execution of steel structures - Part 3: Supplementary rules for high yield strength steels
ENV 1090-4:1997 钢结构制作 第4部分：凹截面结构的补充规则 Execution of steel structures - Part 4: Supplementary rules for hollow section structures
ENV 1090-5:1998 钢结构制作 第5部分：桥的补充规则 Execution of steel structures - Part 5: Supplementary rules for bridges
ENV 1090-6:2000 钢结构制作 第6部分：不锈钢的补充规则 Execution of steel structures - Part 6: Supplementary rules for stainless steel
ENV 1170-8:1996 玻璃混凝土复合材料的试验方法.第8部分:通过耐用性型式试验 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
ENV 12102:1996 发动机驱动的空调器、热泵和带压缩机的去湿机.空中噪音的测量.声功率的测定 Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level
ENV 12108:2001 塑料管道系统 在建筑物内安装家用冷热压力管道系统的指南 Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption
ENV 12977-3:2001 太阳能系统及构件 定制系统 第3部分：太阳能供暖系统用存储器性能 Thermal solar systems and components - Custom built systems - Part 3: Performance characterisation of stores for solar heating systems
ENV 13050:2000 幕墙 防水性 大气压和喷水动态条件下的实验室试验 Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
ENV 1329-2:2001 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 硬塑聚氯乙烯(PVC-U) 第2部分：合格平定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
ENV 13381-2:2002 测定建筑物构件防火作用的试验方法 第2部分：垂直保护膜 Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes
ENV 13381-3:2002 测定建筑物构件防火作用的试验方法 第3部分：混凝土构件保护装置 Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members
ENV 13381-4:2002 测定建筑物构件防火作用的试验方法 第4部分：钢构件保护装置 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members
ENV 13381-5:2002 测定建筑物构件防火作用的试验方法 第4部分：混凝土/成型钢板复合构件的保护装置 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members
ENV 13381-6:2002 测定建筑物构件防火作用的试验方法 第6部分：混凝土浇注空心钢柱的保护装置 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
ENV 13381-7:2002 测定建筑物构件防火作用的试验方法 第6部分：木质构件的保护装置 Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members
ENV 13420:2000 窗 不同气候条件之间性能 试验方法 Windows - Behaviour between different climates - Test method
ENV 13670-1:2000 混凝土结构施工 第1部分：普通 Execution of concrete structures - Part 1: Common
ENV 13801:2000 建筑物中用于粪便和污水排放（低温和高温）的塑料管道系统 热塑性塑料 推荐的安装规范 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
ENV 14383-2:2003 犯罪防范.城市规划和建筑设计.第2部分:城市规划 Prevention of crime - Urban planning and design - Part 2: Urban planning
ENV 14459:2002 电子设备用于煤气灶和气体燃烧设备的危险分析和建设的方法 Method of risk analysis and recommendations for the use of electronics in systems for the control of gas burners and gas burning appliances
ENV 1451-2:2001 建筑物结构内污物和污水排出(低和高温)用塑料管道系统 聚丙烯(PP ) 第2部分：合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity
ENV 1452-6:2001 供水塑料管道系统 硬塑聚氯乙烯(PVC-U) 第6部分：安装指南 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 6: Guidance for installation
ENV 1452-7:2000 供水塑料管道系统 硬聚氯乙烯(PVC-U) 第7部分：合格评定指南 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity
ENV 1453-2:2000 建筑物内污物和废水排放(低和高温)带结构壁管道的塑料管道系统 硬聚氯乙烯(PVC-U) 第2部分：合格评定指南 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
ENV 1504-9:1997 混凝土结构的保护和修理用产品和系统 定义、要求、质量控制和合格评定 第9部分：使用产品和系统的一般规 Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
ENV 1519-2:2001 建筑物结构内污物和污水排放(低和高温)塑料管道系统 聚已烯(PE) 第2部分：合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building stucture - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
ENV 1565-2:2001 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 苯乙烯共聚混合物(SAN+PVC) 第2部分：合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity
ENV 1566-2:2001 建筑物结构内污物和废水排放(低和高温)用塑料管道系统 氯化聚偏氯乙烯(PVC-C) 第2部分：合格评定指南 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity
ENV 1627:1999 窗、门、百叶窗 防盗性能 要求和分类 Windows, doors, shutters - Burglar resistance - Requirements and classification
ENV 1628:1999 窗、门、百叶窗 防盗性能 静负荷下测定防盗能力的试验方法 Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under static loading
ENV 1629:1999 窗、门、百叶窗 防盗性能 动态负荷下测定防盗能力的试验方法 Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading
ENV 1630:1999 窗、门、百叶窗 防盗性能 测定防人为盗窃企图能力的试验方法 Windows, doors, shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts
ENV 196-4:1993 测试水泥的方法 第4部分：定量测定各要素 Methods of testing cement - Part 4: Quantitative determination of constituents
|
|
|
|
