| CEN欧洲标准_建筑材料和建筑物(一) [2007-9-26] |
CEN ISO/TS 15874-7:2003 冷热水装置用塑料管道系统 聚丙烯(PP) 第7部分：合格评定导则 Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003)
CEN ISO/TS 15875-7:2003 冷热水装置用塑料管道系统 交联聚乙烯(PE-X) 第783部分：系统适用性 Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003)
CEN ISO/TS 15876-7:2003 冷热水装置用塑料管道系统 聚丁烯(PB) 第7部分：合格评定导则 Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003)
CEN ISO/TS 15877-7:2003 冷热水装置用塑料管道系统 氯化聚氯乙烯(PVC-C) 第7部分：合格评定导则 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2003)
CEN/TR 13548:2004 General rules for the design and installation of ceramic tiling
CEN/TR 13833:2003 Qualification of construction enterprises
CEN/TR 14613:2003 Thermal performance of building materials and components - Principles for the determination of thermal properties of moist material and components
CEN/TR 14788:2006 Ventilation for buildings - Design and dimensioning of residential ventilation systems
CEN/TR 14862:2004 Precast concrete products - Full-scale testing requirements in standards on precast concrete products
CEN/TR 15123:2005 聚合内饰系的设计、制备和施工 Design, preparation and application of internal polymer plastering systems
CEN/TR 15124:2005 内部石膏粉刷系的设计、制备和施工 Design, preparation and application of internal gypsum plastering systems
CEN/TR 15125:2005 石灰、水泥和石灰水泥内粉刷系的设计、制备和施工 Design, preparation and application of internal cement and/or lime plastering systems
CEN/TR 15131:2006 Thermal performance of building materials - The use of interpolating equations in relation to thermal measurement on thick specimens - Guarded hot plate and heat flow meter apparatus
CEN/TR 15177:2006 混凝土耐冻露性能的试验 内部结构损坏 Testing the freeze-thaw resistance of concrete - Internal structural damage
CEN/TR 15225:2005 Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars
CEN/TR 15352:2006 沥青和沥青粘接剂 有关使用性能规范的制订 2005年现状报告 Bitumen and bituminous binders - Development of performance-related specifications: status report 2005
CEN/TR 15563:2007 Temporary works equipment - Recommendations for achieving health and safety
CEN/TR 1749:2005 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
CEN/TR 81-10:2004 升降机的建造和安装的安全规则.基本规则.第10部分:EN 81标准系列的系统 Safety rules for the construction and installation of lifts - Basics - Part 10: System of the EN 81 series of standards
CEN/TS 12201-7:2003 供水用塑料管道系统 聚乙烯(PE) 第7部分：合格评定的建议 Plastics piping systems for water supply - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
CEN/TS 12390-9:2006 Testing hardened concrete - Part 9: Freeze-thaw resistance - Scaling
CEN/TS 12666-2:2005 地下污水管道用塑料管道系统 聚乙烯(PE) 第2部分：合格评定指南 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
CEN/TS 13126-10:2004 建筑五金 门窗配件 要求和试验方法 第10部分：杆臂平衡系统 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems
CEN/TS 13126-11:2004 建筑五金 门窗配件 要求和试验方法 第11部分：顶部挂凸块配件 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware
CEN/TS 13126-12:2004 建筑五金 门窗配件 要求和试验方法 第12部分：边挂凸块配件 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 12: Side-hung projecting reversible hardware
CEN/TS 13126-13:2004 建筑五金 门窗配件 要求和试验方法 第13部分：平衡块 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 13: Sash balances
CEN/TS 13126-14:2004 建筑五金 门窗配件 要求和试验方法 第14部分：上下拉动框窗紧固件 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners
CEN/TS 13126-15:2004 建筑五金 门窗配件 要求和试验方法 第15部分：卷轴 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 15: Rollers
CEN/TS 13126-16:2004 建筑五金 门窗配件 要求和试验方法 第16部分：拉滑配件 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 16: Fittings for lift and slide systems
CEN/TS 13126-17:2004 建筑五金 门窗配件 要求和试验方法 第15部分：卷轴 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems
CEN/TS 13126-2:2004 建筑五金 门窗配件 要求和试验方法 第2部分：窗执手 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles
CEN/TS 13126-3:2004 建筑五金 门窗配件 要求和试验方法 第3部分：长插销/滑动钮操作件 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button
CEN/TS 13126-4:2004 建筑五金 门窗配件 要求和试验方法 第4部分：长插销 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 4: Espagnolette bolts
CEN/TS 13126-5:2004 建筑五金 门窗配件 要求和试验方法 第5部分：开窗限位器 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows
CEN/TS 13126-6:2004 建筑五金 门窗配件 要求和试验方法 第6部分：(有或无摩擦系)活动撑杆 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system)
CEN/TS 13126-7:2004 建筑五金 门窗配件 要求和试验方法 第7部分：指形窗扣 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 7: Finger catches
CEN/TS 13126-9:2004 建筑五金 门窗配件 要求和试验方法 第9部分：尖轴铰链 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges
CEN/TS 13381-1:2005 测定结构薄板耐火性的试验方法 第1部分：水平保护膜 Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes
CEN/TS 13778:2004 移动破碎机 安全要求 Mobile demolition machinery - Safety requirements
CEN/TS 14038-1:2004 钢筋混凝土电化学再碱化和氯化物的萃取处理 第1部分：再碱化 Electrochemical realkalization and chloride extraction treatments for reinforced concrete - Part 1: Realkalization
CEN/TS 14383-3:2005 犯罪防范 城市和建筑设计 第3部分：住宅 Prevention of crime - Urban planning and building design - Part 3: Dwellings
CEN/TS 14383-4:2006 Prevention of crime - Urban planning and design - Part 4: Shops and offices
CEN/TS 14578:2003 给排水塑料管道系统 不饱和聚酯树脂(UP)玻璃纤维增强热塑塑料(GRP) 敷设建议 Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation
CEN/TS 14632:2006 Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Guidance for the assessment of conformity
CEN/TS 14754-1:2007 Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds
CEN/TS 15087:2005 粘土瓦和混凝土瓦耐掀起性能的测定 紧固件试验方法 Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners
CEN/TS 15331:2005 建筑物维护业开发、管理和控制准则 Criteria for design, management and control of maintenance services for buildings
CEN/TS 15379:2006 Building management - Terminology and scope of services
CEN/TS 15399:2007 Gas Supply Systems - Guidelines for Management systems for Gas Distribution Network
CEN/TS 1555-7:2003 气体燃料供应用塑料管系 聚乙烯 第7部分：合格评定导则 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity
CEN/TS 772-22:2006 Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units
CEN/TS 81-29:2004 电梯结构和安装的安全规则 客货电梯 第29部分：对EN 81-20至EN 81-28(包括EN 81-1:1998和EN 81-2:1998) Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 29: Interpretations related to EN 81-20 up to EN 81- 28 (includes EN 81-1:1998 and EN 81-2:1998)
CEN/CR 1234:1993 Standardization programme - European Standards in the field of Construction products as defined by the Directive 89/106/EEC
CEN/CR 12695:1997 金属烟囱 耐腐蚀性要求和试验方法 Metal chimneys - Corrosion resistance requirements and test methods
CEN/CR 12793:1997 硬质混凝土碳酸化深度测量 Measurement of the carbonation depth of hardened concrete
CEN/CR 13737:2001 CEN/TC 234“供气”制定的功能标准实施指南 Implementation Guide for functional standards prepared by CEN/TC 234 "Gas supply"
CEN/CR 13901:2000 混凝土生产和合格控制用混凝土族概念的使用 The use of the concept of concrete families for the production and conformity control of concrete
CEN/CR 13902:2000 试验新制混凝土中水/水泥比的方法 Test methods for determining the water/cement ratio of fresh concrete
CEN/CR 13933:2000 圬工水泥 可使用性（粘度）测试 Masonry cement - Testing for workability (cohesivity)
CEN/CR 13962:2000 LAC结构组件应用指南 Guidelines for the application of LAC-components in structures
CEN/CR 14245:2001 EN 197-2“一致性评估”应用指南 Guidelines for the application of EN 197-2 "Conformity Evaluation"
CEN/CR 14378:2002 建筑物通风 空调元件的机械能量损耗系数的实验测定 Ventilation for buildings - Experimental determination of mechanical energy loss coefficients of air handling components
CEN/CR 1752:1998 建筑物通风 室内环境设计标准 Ventilation for buildings - Design criteria for the indoor environment
CEN/CR 1901:1995 避免破坏混凝土中的碱性硅石反应的区域性规范和建议 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete
CEN/CR 245:1986 绝热 根据其绝热性能对建筑材料的分类 Thermal insulation - Classification of building materials according to their thermal insulation properties
CEN/CR 833:1992 不连续的屋顶遮盖物的一般要求 General requirements for a discontinuously laid roofing covering
CWA 14646:2003 预应力结构柱式拉紧工具安装的要求和专家公司及人员的资格 Requirements for the installation of post-tensioning kits for prestressing of structures and qualification of the specialist company and its personnel
EN 1004:2004 预制件移动式工作平台 计算、构造、设计负荷和安全技术要求 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements
EN 1008:2002 混凝土添加水；对水适用性，包括混凝土制作时作为混凝土添加水的回收水的取样、检验和评定的规定 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN 101:1991 瓷砖.划痕硬度试验 Ceramic tiles - Determination of scratch hardness of surface according to Mohs
EN 1015-1:1998 圬工砂浆试验方法.第1部分:粒度分布测定(筛析法) Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
EN 1015-1:1998/A1:2006 EN 1015-1:1998的第一次补充件 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)
EN 1015-10:1999 圬工灰浆试验方法.第10部分:硬化灰浆干块密度测定 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
EN 1015-10:1999/A1:2006 EN 1015-10:1999的第一次补充件 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar
EN 1015-11:1999 圬工灰浆试验方法.第11部分:硬化灰浆的柔性和压缩强度测定 Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1015-11:1999/A1:2006 EN 1015-11:1999的第一次补充件 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar
EN 1015-12:2000 圬工灰浆试验方法.第12部分:衬底上的硬化打底和粘着灰浆粘结强度测定 Methods of test of mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates
EN 1015-17:2000 圬工灰浆试验方法.第17部分:新鲜灰浆中水溶氯含量测定 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
EN 1015-17:2000/A1:2004 EN 1015-17:2000的第一次补充件 Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars
EN 1015-18:2002 砖石工程用灰浆的试验方法 第18部分:硬化灰浆毛细吸水率的测定 Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar
EN 1015-19:1998 圬工砂浆试验方法.第19部分:硬化抹灰和灰浆水蒸气穿透率测定 Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars
EN 1015-19:1998/A1:2004 EN 1015-19:1998的第一次补充件 Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars
EN 1015-2:1998 圬工砂浆试验方法.第2部分:砂浆的成批抽样和试验砂浆制备 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars
EN 1015-2:1998/A1:2006 EN 1015-2:1998的第一次补充件 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars
EN 1015-21:2002 砖石工程用灰浆的试验方法 第21部分：单层灰将与基质兼容性的测定 Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates
EN 1015-3:1999 圬工砂浆试验方法.第3部分:新凝砂浆稠度测定(流动稠度试验台法) Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
EN 1015-3:1999/A1:2004 EN 1015-3:1999的第1次补充件 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
EN 1015-3:1999/A2:2006 EN 1015-3:1999的第2次补充件 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)
EN 1015-4:1998 圬工砂浆试验方法.第4部分:新凝砂浆稠度测定(浸透法) Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)
EN 1015-6:1998 圬工砂浆试验方法.第6部分:新凝砂浆体密度测定 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
EN 1015-6:1998/A1:2006 EN 1015-6:1998的第一次补充件 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
EN 1015-7:1998 圬工砂浆试验方法.第7部分:新凝砂浆空气含量测定 Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar
EN 1015-9:1999 圬工灰浆试验方法.第9部分:新鲜灰浆工作寿命和可改变时间的测定 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
EN 1015-9:1999/A1:2006 EN 1015-9:1999的第一次补充件 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar
EN 1020:1997 净热输入不超过300kw的非家用燃气对流式空气加热器.带有风扇辅助传输燃烧空气和/或燃烧产物 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products
EN 1024:1997 房瓦.几何性能的测定 Clay roofing tiles for discontinuous laying - Determination of geometric characteristics
EN 1026:2000 窗和门.气密性.试验方法 Windows and doors - Air permeability - Test method
EN 1027:2000 门窗.水密性.试验方法 Windows and doors - Watertightness - Test method
EN 1052-1:1998 砂浆试验方法.第1部分:承压强度测定 Methods of test for masonry - Part 1: Determination of compressive strength
EN 1052-2:1999 圬工试验方法.第2部分:挠曲强度的测定 Methods of test for masonry - Part 2: Determination of flexural strength
EN 1052-3:2002 圬工用试验方法 第3部分：初始剪切强度的测定 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 1052-3:2002/A1:2007 EN 1052-3:2002的第一次补充件 Methods of test for masonry - Part 3: Determination of initial shear strength
EN 1052-4:2000 圬工试验方法.第4部分:包括防潮层的剪切强度的测定 Methods of test for masonry - Part 4: Determination of shear strength including damp proof course
EN 1052-5:2005 砌块试验方法 第5部分：弯曲粘接抗拉强度的测定 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
EN 1065:1998 金属支柱. 承压可调钢支柱. 特性. 试验. 负荷能力 Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
EN 107:1980 窗子的检验方法;机械检验 Methods of testing windows - Mechanical test
EN 1074-1:2000 供水阀门.目的要求的适合性和相应的验证试验.第1部分:一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
EN 1074-4:2000 供水阀门.目的要求的适合性和相应的验证试验.第2部分:隔离阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
EN 1075:1999 木结构件.试验方法.用穿孔金属板紧固件进行组装 Timber structures - Test methods - Joints made with punched metal plate fasteners
EN 1097-1:1996 用于测定集料力学和物理性能的试验,第1部分:耐磨性测定(micro-Deral) Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 1097-1:1996/A1:2003 EN 1097-1:1996的第一次补充件 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
EN 1097-10:2002 集料的机械和物理性能的试验 第10部分:吸水高度的测定 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height
EN 1097-2:1998 集料的机械和物理性能试验.第2部分:抗破裂性能测定方法 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-2:1998/A1:2006 EN 1097-2:1998的第一次补充件 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-3:1998 测定集料机械及物理特性的试验 第3部分:测定散装集料密度和晶间孔隙容积的方法 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 1097-4:1999 集料机械和物理性能试验.第4部分:测定压缩烘干后填充料空隙 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
EN 1097-5:1999 集料的物理和机械特性试验.第5部分:通风炉中干燥法测定水含量 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
EN 1097-6:2000 集料机械和物理性能试验.第6部分:颗粒密度和吸水率的测定 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-6:2000/A1:2005 EN 1097-6:2000的第一次补充件 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-7:1999 集料物理和机械特性试验.第7部分:填充物的颗粒密度的测定.比重瓶法 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-8:1999 集料机械和物理性能试验.第8部分:测定抛光石数值 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value
EN 1097-9:1998 集料机械和物理性能试验.第9部分:通过防滑钉胎磨擦测定耐磨性.NORDIC试验 Tests for mechanical and physical properties of aggregate - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
EN 1097-9:1998/A1:2005 EN 1097-9:1998的第一次补充件 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
EN 1107-1:1999 防水挠性薄板.第1部分:屋顶防水沥青毡片.尺寸稳定性测定 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability
EN 1107-2:2001 防水挠性薄板.尺寸稳定性测定.第2部分:屋顶防水用塑料和橡胶薄板 Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
EN 1109:1999 防水挠性薄板.屋顶防水沥青毡片.低温下柔韧性的测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
EN 111:2003 壁悬式洗手盆。连接尺寸。 Wall-hung hand rinse basins - Connecting dimensions
EN 1110:1999 防水挠性薄板.屋顶防水沥青毡片.提高温度下耐流性测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature
EN 1111:1998 卫生龙头.恒温缓和龙头.一般技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN 1121:2000 门.两种不同气候间的门扇的性能.试验方法 Doors - Behaviour between two different climates - Test method
EN 1125:1997 建筑五金--用横杆操作的应急出口装置--要求和试验方法 Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
EN 1125:1997/A1:2001 EN 1125:1997的第一次补充件 Building hardware - Panic exit devices operated by a horizontal bar - Requirements and test methods
EN 1148:1998 热交换器 局部加热用水换热器 Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data
EN 1148:1998/A1:2005 EN 1148:1998的第一次补充件 Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data
EN 115:1995 机械楼梯和自动扶梯制造与安装的安全规定 Safety rules for the construction and installation of escalators and passenger conveyors
EN 115:1995/A1:1998 NF EN 115-1995的修改件1 Safety rules for the construction and installation of escalators and passenger conveyors
EN 115:1995/A2:2004 NF EN 115-1995的修改件2 Safety rules for the construction and installation of escalators and passenger conveyors
EN 1154:1996 建筑五金--可控门关闭装置--要求和试验方法 Building hardware - Controlled door closing devices - Requirements and test methods
EN 1155:1997 建筑五金 弹簧门的电磁限动器 规定和试验方法 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
EN 1155:1997/A1:2002 EN 1155:1997的第一次补充件 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
EN 1158:1997 建筑五金--门坐标器--要求和试验方法 Building hardware - Door coordinator devices - Requirements and test methods
EN 1158:1997/A1:2002 EN 1158:1997的第一次补充件 Building hardware - Door cordinator devices - Requirements and test methods
EN 1168:2005 混凝土预制件 空心板 Precast concrete products - Hollow core slabs
EN 1169:1999 预浇混凝土制品.玻璃纤维混凝土产品质量控制的通用规则 Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
EN 1170-1:1997 预制混凝土产品.玻璃增强混凝土试验方法.第1部分:基质坚硬度测量.跌落试验法 Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method
EN 1170-2:1997 预制混凝土产品.玻璃增强混凝土试验方法.新GRC清洗出法对纤维含量测定 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test"
EN 1170-3:1997 预制混凝土产品.玻璃增强混凝土试验方法.喷雾GRC纤维含量测定 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC
EN 1170-4:1997 预制混凝土产品.玻璃增强混凝土的试验方法.简化弯曲实验法测定弯曲强度 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method
EN 1170-5:1997 混凝土预制件 水泥-玻璃复合材料的试验方法 第5部分: 抗弯曲性的测量,所谓(完整的弯曲试验)的方法 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method
EN 1170-6:1997 混凝土预制件 水泥-玻璃复合材料的试验方法 第6部分: 浸没水吸收性和干密度的测定 Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density
EN 1170-7:1997 预制混凝土产品.玻璃增强混凝土试验方法.第7部分:随潮湿含量尺寸变化极限测量 Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content
EN 1191:2000 门和窗.反复开关耐受性.试验方法 Windows and doors - Resistance to repeated opening and closing - Test method
EN 1192:1999 门.强度要求分级 Doors - Classification of strength requirements
EN 1194:1999 木结构件.胶合木材.强度分级和特征值测定 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
EN 1195:1997 木结构 试验方法 结构地板的性能 Timber structures - Test methods - Performance of structural floor decking
EN 1195:1997 木结构 试验方法 结构地板的性能 Timber structures - Test methods - Performance of structural floor decking
EN 1196:1998 家用和非家用燃气空气加热器.冷凝式空气加热器的补充要求 Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters
EN 12001:2003 混凝土灰浆用输送、喷射和配料机械 安全要求 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
EN 12002:2002 瓷砖用粘接剂 水泥状粘接剂和灰浆横向变形的测定 Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts
EN 12003:1997 瓷砖用粘接剂.剪切强度的测定 Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives
EN 12004:2001 板用粘接剂.定义和规范 Adhesives for tiles - Definitions and specifications
EN 12004:2001/A1:2002 EN 12004:2001的第一次补充件 Adhesives for tiles - Definitions and specifications
EN 12015:2004 电磁兼容性 电梯、机械楼梯和移动式人行道的产品系列标准 辐射 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
EN 12016:2004 电磁兼容性 电梯、机械楼梯和移动式人行道的产品系列标准 抗扰性 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 12039:1999 防水用挠性薄板.屋面防水用沥青毡片.颗粒粘性的测定 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
EN 12045:2000 电操纵百叶窗和遮蔽物.使用安全性.传输力测量 Shutters and blinds power operated - Safety in use - Measurement of the transmitted force
EN 12046-1:2003 操作力 试验方法 第1部分:窗 Operating forces - Test method - Part 1: Windows
EN 12046-2:2000 操作力.试验方法,第2部分:门 Operating forces - Test method - Part 2: Doors
EN 12050-1:2001 建筑废水提升设备.建造原理和试验.第1部分:废水提升设备 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter
EN 12050-2:2000 建筑废水提升设备.建造原理和试验.第2部分:无渣废水的提升设备 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater
EN 12050-3:2000 建筑废水提升设备.建造原理和试验.第3部分:有限应用的含渣的废水提升设备 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications
EN 12050-4:2000 建筑废水提升设备.建造原理和试验.第4部分:无渣和含量的废水提升用的止回阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12051:1999 建筑五金.门窗栓.要求和试验方法 Building hardware - Door and window bolts - Requirements and test methods
EN 12056-1:2000 建筑内重力排污系统.第1部分:总则和性能要求 Gravity drainage systems inside buildings - Part 1: General and performance requirements
EN 12056-2:2000 建筑物内重力排污系统.第2部分:盥洗管道工程,设计和计算 Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation
EN 12056-3:2000 建筑物内重力排水系统.第3部分:屋顶排水管道工程，设计和计算 Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation
EN 12056-4:2000 建筑内重力排水系统.第4部分:废水提升设备.设计和计算 Gravity drainage systems inside buildings - Part 4: Wastewater lifting plants - Layout and calculation
EN 12056-5:2000 建筑内重力排污系统.第5部分:安装和试验,操作、维修和使用导则 Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use
EN 12057:2004 天然石 石材 规范 Natural stone products - Modular tiles - Requirements
EN 12058:2004 天然石 地面石和台阶铺面石 要求 Natural stone products - Slabs for floors and stairs - Requirements
EN 12085:1997 建筑设施用的绝热产品--试样线性尺寸的测定 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
EN 12086:1997 建筑设施用的绝热产品--水蒸汽传导特性的测定 Thermal insulating products for building applications - Determination of water vapour transmission properties
EN 12087:1997 建筑设施用的绝热产品--浸水的长期吸水率测定 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 12087:1997/A1:2006 EN 12087:1997的第一次补充件 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 12088:1997 建筑设施用的绝热产品--扩散的长期吸水率测定 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
EN 12089:1997 建筑设施用的绝热产品--弯曲性能测定 Thermal insulating products for building applications - Determination of bending behaviour
EN 12090:1997 建筑设施用的绝热产品--剪切性能的测定 Thermal insulating products for building applications - Determination of shear behaviour
EN 12091:1997 建筑设施用的绝热产品--耐冻熔测定 Thermal insulating products for building applications - Determination of freeze-thaw resistance
EN 12095:1997 塑料管道系统--雨水管道系统的托架--托架强度的试验方法 Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength
EN 12097:2006 Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems
EN 12098-2:2001 加热系统控制器.第2部分:热水加热系统用最佳启-停控制设备 Controls for heating systems - Part 2: Optimum start-stop control equipment for hot water heating systems
EN 12098-5:2005 加热系统用控制器 第5部分：加热系统起停开关设备 Controls for heating systems - Part 5: Start-stop schedulers for heating systems
EN 121:1991 低吸水性的模压陶瓷瓷砖（E≤3%） A1组 Extruded ceramic tiles with low water absorption (E<=3%) - Group AI
EN 12109:1999 建筑内真空排放系统 Vacuum drainage systems inside buildings
EN 12110:2002 隧道机械 压缩空气阀门 安全要求 Tunnelling machines - Air locks - Safety requirements
EN 12111:2002 隧道机械 开路机 连续开采机和掘进机 安全要求 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
EN 12114:2000 建筑热工性能;建筑元件和构件的空气渗透性;实验室试验方法 Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method
EN 1213:1999 建筑用阀门.便携式供水用铜合金截止阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
EN 12149:1997 卷筒墙饰.重金属或其他氯乙烯释放徒动的测定 Wallcoverings in roll form - Determination of migration of heavy metals and certain other elements, of vinyl chloride monomer and of formaldehyde release
EN 12152:2002 幕墙.透气性.性能要求和分类 Curtain walling - Air permeability - Performance requirements and classification
EN 12153:2000 幕墙.空气流动性.试验方法 Curtain walling - Air permeability - Test method
EN 12154:1999 幕墙.防水性.性能要求和分级 Curtain walling - Watertightness - Performance requirements and classification
EN 12155:2000 幕帘.耐水性在实验室静压下试验 Curtain walling - Watertightness - Laboratory test under static pressure
EN 12158-1:2000 材料提升设备.第1部分:带易进入平台的提升设备 Builders hoists for goods - Part 1: Hoists with accessible platforms
EN 12158-2:2000 材料提升设备.第2部分:无可易进入负载装置 Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
EN 12159:2000 个人用建筑卷扬机和带垂直导向的升降箱 Builders hoists for persons and materials with vertically guided cages
EN 12170:2002 建筑采暖系统 操作、维修和使用说明书 对操作者资格有要求的采暖系统 Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator
EN 12171:2002 建筑采暖系统.操作、维护和使用的文件准备程序.采暖系统 Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator
EN 12179:2000 幕墙.抗风性;试验方法 Curtain walling - Resistance to wind load - Test method
EN 12188:1999 混凝土结构的防护和修理的产品和系统.试验方法.结构粘接剂的性能方面钢对钢粘接测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents
EN 12189:1999 混凝土结构的防护和修理的产品和系统.试验方法.开放时间的测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time
EN 12190:1998 混凝土结构的保护和修理用制品和系统.试验方法.修理灰浆的压强测定 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
EN 12192-1:2002 混凝土结构的保护和修理用产品和系统.粒度分析.第1部分:混合灰浆的干成分的试验方法 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar
EN 12192-2:1999 混凝土结构的防护和修理的产品和系统.第2部分:聚脂粘接剂的填充料的试验方法 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
EN 12193:1999 体育方面用照明 Light and Lighting - Sports lighting
EN 12194:2000 内部和外部遮板.错用试验方法 Shutters, external and internal blinds - Misuse - Test methods
EN 12201-1:2003 供水用塑料管道系统 聚乙烯(PE) 第1部分：总则 Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
EN 12201-2:2003 供水用塑料管道系统 聚乙烯(PE) 第2部分：管 Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes
EN 12201-3:2003 供水塑料管系统 聚乙烯(PE) 第3部分:管件 Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings
EN 12201-5:2003 供水塑料管系统 聚乙烯(PE) 第5部分:系统的适用性 Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system
EN 12207:1999 窗门.透气性.分级 Windows and doors - Air permeability - Classification
EN 12208:1999 窗和门.防水性.分类 Windows and doors - Watertightness - Classification
EN 12209:2003 建筑五金 锁具 机械操作锁具和锁板 要求和试验方法 Building hardware - Locks and latches - Mechanically operated locks, latches and locking plates - Requirements and test methods
EN 12210:1999 门窗.抗风性.分类 Windows and doors - Resistance to wind load - Classification
EN 12211:2000 窗和门.挡风;试验方法 Windows and doors - Resistance to wind load - Test method
EN 12216:2002 百叶窗的术语、词汇和定义(三种语言) Shutters, external blinds, internal blinds - Terminology, glossary and definitions
EN 12217:2003 门 操纵力 要求和分级 Doors - Operating forces - Requirements and classification
EN 12219:1999 门.气候影响.要求和分级 Doors - Climatic influences - Requirements and classification
EN 12220:1998 建筑物通风 管路网 一般通风用环状凸缘--尺寸 Ventilation for buildings - Ductwork - Dimensions of circular flanges for general ventilation
EN 12236:2002 建筑物通风.管道悬吊装置和支撑物.强度要求 Ventilation for buildings - Ductwork hangers and supports - Requirements for strength
EN 12237:2003 建筑通风 风道工程 钢板圆截面风道的强度和密封度 Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts
EN 12238:2001 建筑物通风.通气终端装置.混合气流设施的空气动力学试验和额定值 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for mixed flow application
EN 12239:2001 建筑物的通风.空气终端装置.气流排放设施的空气动力试验和额定值 Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications
EN 12269-1:2000 用射束试验法测定钢筋和高压蒸汽加气水泥间的粘结情况.第1部分:短时试验 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test
EN 12269-2:2003 通过束试验对加强钢和压热充气混凝土之间粘接性能的测定 第2部分：长效试验 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test
EN 12279:2000/A1:2005 EN 12279:2000的第一次补充件 Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements
EN 12310-1:1999 防水软板.第1部分:屋顶用沥青板.耐撕裂性测定 Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank)
EN 12310-2:2000 防水软板.抗撕裂测定.第2部分:屋顶用塑料和橡胶板 Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing
EN 12311-1:1999 防水软板.第1部分:屋顶防水沥青毡.拉伸性能测定 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
EN 12311-2:2000 防水软板.拉伸性能测定.第2部分:屋顶用塑料和橡胶板 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
EN 12316-1:1999 防水软板.第1部分:屋顶用防水沥青板.连接处的抗蜕皮的测定 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints
EN 12316-2:2000 防水软板.抗蜕皮的测定.第2部分:屋顶防水橡塑板 Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
EN 12317-1:1999 防水软板.第1部分:屋顶防水沥青毡.接缝剪切阻力测定 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints
EN 12317-2:2000 防水软板.抗剪切的测定.第2部分:屋顶防水橡塑板 Flexible sheets for waterproofing - Determination of the shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
EN 12320:2001 建筑五金.挂锁及其配件.要求和试验方法 Building hardware - Padlocks and padlock fittings - Requirements and test methods
EN 12326-1:2004 不连续屋顶材料和覆面用石板和石材.第1部分:产品规范 Slate and stone products for discontinuous roofing and cladding - Part 1: Product specification
EN 12326-2:2000 屋顶用瓦板岩和石制品 第2部分:试验方法 Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test
EN 12326-2:2000/A1:2004 EN 12326-2:2000的第一次补充件 Slate and stone products for discontinuous roofing and cladding - Main element - Part 2: Methods of test
EN 12327:2000 燃气供应系统.压力试验、交付使用和停运过程.功能要求 Gas supply systems - Pressure testing, commissioning and decommissioning procedures - Functional requirements
EN 12336:2005 隧道机械 盾构机、水平掘进机、螺旋钻探机、隧道内衬装置 安全要求 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
EN 12350-1:1999 新鲜混凝土测试.第1部分:取样 Testing fresh concrete - Part 1: Sampling
EN 12350-2:1999 新浇混凝土试验.第2部分:蹋落度试验 Testing fresh concrete - Part 2: Slump test
EN 12350-3:1999 新浇混凝土试验.第3部分:贝氏振动稠度试验 Testing fresh concrete - Part 3: Vebe test
EN 12350-4:1999 新浇混凝土试验.第4部分:密实度等级 Testing fresh concrete - Part 4: Degree of compactability
EN 12350-5:1999 试验用新浇混凝土.第5部分:流动试验台试验 Testing fresh concrete - Part 5: Flow table test
EN 12350-6:1999 试验用新浇混凝土.第6部分:密度 Testing fresh concrete - Part 6: Density
EN 12350-7:2000 新鲜混凝土试验.第7部分:空气含量.压力法 Testing fresh concrete - Part 7: Air content - Pressure methods
EN 12354-1:2000 建筑物声学.根据元件性能评估建筑物的声学性能.第1部分:房间之间的气载噪声的隔绝 Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms
|
|
|
|
